DYDT-100 Elevator Car Door and Floor Door Disassembly and Assembly Experiment Platform

Release time：2024-06-27 02:30viewed：times

1. Equipment Overview:
Following the modular design concept, the teaching tr*ning design is carried out according to the requirements of elevator
installation process; the elevator car door and floor door tr*ning device adopts horizontal movement, so that the floor door and car door can be installed and debugged in a mobile manner. 2. Technical parameters
1. Door opening form: middle split type
2. Components: floor door and car door
3. Single car door width: 300mm
4. Car door panel height: 1000mm, the door panel is st*nless steel with a thickness of 1.0mm
5. Control mode: frequency conversion control
6. Equipment total height: 1500mm
7. Equipment total width: 1200mm
8. Comprehensive integrated tr*ning virtual simulation system for professional skills The model
in the software can be rotated 360°, enlarged, reduced, and translated, and there are general interactive buttons: return, home page, help. There are prompts for all virtual simulation task processes, and the software automatically ticks after completing a task. There are experimental tasks 1 and basic solids above the tool library ( the XYZ space coordinate icon automatically rotates with the rotation when the model is rotated.) A. Plane solids: The experimental steps are divided into experimental tasks (text prompt tasks) - build models (drag the model in the tool library to the three-projection surface system, and the projection will be automatically displayed. There will be prompts when the selection is wrong) - change posture (change by clicking the up, down, left, and right arrows) - select projection (enter the answering interface, and select the three-dimensional projection diagram completed at this time from the 6 items) B. Cutting solids: The experimental steps are divided into experimental tasks (text prompt tasks) - build models (drag the model in the tool library to the three-projection surface system, and the projection will be automatically displayed) - mark the projection situation (mark the three-dimensional projection diagram, and select the corresponding marking symbol in the 14 blank columns) C. Intersecting solids: The experimental steps are divided into experimental tasks (text prompt tasks) - digging holes (select any digging hole model, then you can select any surface in the XYZ space coordinates, the models will switch at the same time, and a coordinate slider will appear. According to the displacement of the slider, the model will have a corresponding degree of cross-section) - aperture change (select 1-4 apertures) - rear through hole - select projection (enter the answering interface, and select the completed three-dimensional projection diagram at this time in 8 items) 2. Assembly A. Assembly assembly: The experimental steps are divided into experimental tasks (text prompt tasks) - select the assembly model (8 models can be selected) - assemble the assembly (select the tool library model according to the selected model and drag and drop the assembly) - section the assembly (you can select any surface in the XYZ space coordinates, the models will switch at the same time, and a coordinate slider will appear. According to the displacement of the slider, the model will have a corresponding degree of cross-section) - select side projection (enter the answering interface, based on the known front and horizontal projection diagrams, select the correct side projection diagram in 3 items) B. Assembly drawing reading: The experimental steps are divided into experimental tasks (text prompt tasks) - select the assembly section view (8 types of drawings can be selected) - build the assembly model (select the tool library model according to the selected model and drag and drop the combination) - cut the assembly (you can select any surface in the XYZ space coordinates, the model will switch at the same time, and a coordinate slider will appear. According to the displacement of the slider, the model will appear with a corresponding degree of section) - select the left view (enter the answer interface, according to the known m*n view and top view, select the correct left view from the 3 items) 3. Assembly A. Mechanical transmission mechanism : 8 mechanisms (worm gear, gear rack, spiral transmission, plane external meshing gear, plane internal meshing gear, space spur bevel gear, belt drive , ch*n drive) are optional. After selecting, the model will appear in the toolbar. Drag the model freely to combine. After the combination is completed, the model can be operated. Each mechanism comes with an introduction, video demonstration, and drawing method. There are 6 questions in the answer interface, and each question has 4 options. B. Gear oil pump: Select the tool library model according to the prompts and build the model step by step. You can choose to learn the introduction, drawing method, and animation principle (the internal movement principle of the model can be visualized). There are 2 questions in the answering interface, and 4 options for each question. C. Mechanical mechanism construction: 2 mechanisms (2-degree-of-freedom robotic arm, 3-degree-of-freedom robotic arm). Select the tool library model according to the prompts and build the model step by step. After the combination is completed, the model can be operated. Each mechanism comes with an introduction and video demonstration. There are 2 questions in the answering interface (both models must be built before entering), and 4 options for each question. 2. Door system debugging teaching equipment configuration:

Serial number	name	quantity	unit	Remark
1	Fixed frame	1	tower
2	Mobile Frame	1	tower
3	Positioning seat	4	indivual
4	Floor door mounting bracket	1	indivual
5	Car door mounting bracket	1	indivual
6	Center split landing door	1	set	St*nless steel door leaf
7	Center split car door	1	set	St*nless steel door leaf
8	Center-type gantry crane	1	set
9	Door sill	1	strip
10	Car door threshold	1	strip
11	Center split door sill	1	set
12	Center split door frame	1	set	St*nless steel
13	Door Knife	1	set
14	Installation Tools	1	set	Level, plumb bob, wrench, screwdriver, measuring tape, bevel gauge, hammer, etc.
15	Random Information	1	share	Practical tr*ning work instructions and related drawings, etc.

3. Tr*ning content:

Serial number	Tr*ning content
1	Adjustment of landing door lock
2	Door knife installation and adjustment
3	Installation and adjustment of center split landing door sill
4	Installation and adjustment of center split landing doors
5	Installation and adjustment of center-split door frame
6	Installation and adjustment of the sill of the center-split landing door
7	Installation and adjustment of car door safety touch plate

Previous：DYLYT-38 Four-story Elevator Simulation Experiment Platform

Next：DYFT-38 Transparent Escalator Experimental Platform