Wind power generation system principle experimental device

Wind power generation system principle experimental device,During the steam condensation, heat transfer and thermal test experimental device

1. System summary

Wind power generation teaching experiment system is composed of seven units systems for power generation unit, charging unit, power storage unit, inverter module, control unit, carrier unit, and display unit. The research and tr--ning and teaching of universities and graduate students based on wind power -based subjects.

Characteristics

The system experimental platform integrates indoor temperature/humidity meter, and the wind speed measurement system makes users operate more intuitive.

The system adopts digital DSP technology to fully manage the battery filling and discharge power.

The system panel uses intuitive digital instruments and liquid crystal display, allowing users to understand the system working status in real time.

The power supply on the system can provide users with AC 110V/220V pure sine wave AC power.

Wind power generation teaching experiment system can allow tr--ning students to disassemble and move themselves, use simple, energy -saving and environmental protection, and pollution -free.

Increase the principle of distributed power generation and experimental modules, so that students will increase their understanding of new knowledge

2. System operation technical conditions

1. Wind system

Wind wheel diameter: 1.65 (m)

Start wind speed: 1.5 (m/s)

The rated wind speed: 12 (m/s)

Safety wind speed: 35 (m/s)

Work form: upper -style permanent magnet synchronous generator

Wind leaves rotation direction: clockwise

Number of wind leaves: 3 (film)

Wind leaf material: glass enhanced polypropylene material

Electrical Material: Aluminum Alloy & St--nless Steel

Simulation cave: --r volume: 34073m3/h, 1275Pa-2138Pa, 2.2kW;

Wind power generation system principle experimental device,During the steam condensation, heat transfer and thermal test experimental device

Technical Parameters:

1. Enter power supply: three -phase AC380V ± 10% 50Hz, power 8.0kW.

2. Total power heating: 热 8.0kW, steam control pressure gauge: 0-0.4MPa.

3. Cold water flow measurement: Use rotor flowmeter, range: 40-400L/h.

4. The heating device of the sleeve: the inner diameter of the inner tube φ18mm, the inner tube outer diameter φ20mm (bronze pipe). The internal diameter of the outer pipe is φ52mm, the outer diameter φ57mm (304 st--nless steel pipe), and the tube is 1200mm.

5. There are three safety protection devices: safety valve, pressure gauge relay, and temperature controller on the steam generator.

6. Temperature measurement: The measurement system is equipped with an intelligent temperature control instrument (PID adjustment temperature control, accuracy ± 0.2 ° C), and high -precision PID pressure regulating module circuit.

7. Dimensions: 1500 × 500 × 1700mm. The shape is st--nless steel moving bracket with a double brake wheel.

8. Building building and smart building electrical installation virtual simulation software

Based on the UNITY3D design, users choose different interactive interface size based on the computer configuration. The software in the software can be rotated, magnified, reduced, and translated at 360 °. There are small assistant tips for software use, the content is as follows:

A. Wet alarm system

1. System summary: Overview of Wet Alarm System

2. Equipment cognition: there are ** perspectives, equipment det--ls (displayed or parameters of the device), practice (built -in 6 selection questions, there are prompts for correctness and errors), schematic diagrams (can be entered from the schematic diagram Go to the device). The equipment includes: nozzle, water flow indicator, signal butterfly valve, exhaust valve, fire alarm control, executive pressure gauge, high water tank, Weia control cabinet, stabilization tank, flow switch, end -end water testing device, dr--nage facility, water pump combinations, water pump combination Instruments, hydraulic bells, latencys, wet alarms, butterfly valves, stop valves, fire pumps, safe stabilization valves, fire pools.

3. Principles display: Show the working principle of the wet alarm system, the three -dimensional animation demonstration, the three -dimensional model is translucent, and the internal water flow can be seen. Equipped with exercise modules (4 built -in questions, there are prompts to choose correct and errors)

4. Design arrangement: There are choices and calculation questions, each question has scored scores. After submission, the correct answer and score are displayed