DYLY-BX Integrated Wiring Assessment and Training Platform

Release time：2024-06-21 07:00viewed：times

1. System Overview This system is a building intelligent security wiring tr*ning and assessment equipment developed
for secondary vocational schools and vocational education and tr*ning institutions . Based on the characteristics of the security wiring system in intelligent building projects, the system is targeted at intercom access control, indoor security, perimeter defense, Design the installation, wiring and debugging of video surveillance, patrol and other systems to strengthen students' engineering abilities in the installation, electrical wiring, debugging, fault diagnosis and m*ntenance of each module of the security wiring system. It is suitable for the installation and operation of intelligent equipment in buildings and property management. Teaching and tr*ning in management and security related majors. The system is based on an architectural model and consists of two parts: an intelligent building (community) and a management center. The intelligent building (community) can simulate the security room of an intelligent building or the security room of an intelligent community. Project tr*ning in this system can test students' teamwork ability, planning and organization ability, building equipment installation and debugging ability, project implementation ability, professional quality and communication ability, etc. The equipment is a two-story simulated building constructed of 1 aluminum alloy bracket and 17 mesh panels, which simulate the first-floor machine room, first-floor corridor, first-floor corridor gate, second-floor corridor, and second-floor corridor of a building. Windows, second floor residents, second floor resident doors, second floor resident windows, vertical shafts and building perimeter. The room provides installation ranges on the front, back, side walls and ceiling walls, on which various building intelligent devices can be installed; it also provides room doors and windows, on which electric locks, electromagnetic locks, door magnets and window anti-theft detectors can be installed and other devices to realize the installation and operation of various systems in smart buildings, such as "intercom access control and indoor security systems" and "closed-circuit television monitoring and peripheral security systems", etc. Compared with a single-layer simulation floor, a two-layer simulation floor needs to consider the multi-story structural relationship of an intelligent building. In addition to cultivating students' engineering construction capabilities, it can also cultivate their engineering design capabilities and engineering innovation capabilities, which is in line with the practice of colleges and universities. teaching needs. 2. System structure and composition The building intelligent security wiring tr*ning system adopts modular design and consists of building model, intercom access control subsystem, indoor security subsystem, perimeter defense subsystem, video surveillance subsystem, patrol subsystem, etc. The architectural model is composed of standard specifications of aluminum alloy industrial profiles and mesh mounting plates, and is equipped with a m*n power box. The architectural model is divided into two parts: an intelligent building (community) and a management center. The intelligent building (community) is equipped with unit doors and single windows, which enables engineering tr*ning such as equipment installation of the intercom access control system in the intelligent community, and enables visibility of units and single households. Intercom function. The management center realizes centralized monitoring and management of the security area, and is equipped with typical management equipment such as management center computers, video surveillance cabinets, and surveillance computers. Install smoke detectors, infrared detectors, glass break detectors, vibration detectors, door sensors, infrared beams and patrol points in smart buildings (communities). The windows of the smart building (community) are equipped with curt*n detectors to realize indoor security and perimeter prevention functions. In the management center area and security area, install typical surveillance equipment (dome cameras, infrared cameras, gun cameras, integrated spherical cameras, etc.) to achieve video surveillance in key areas. There are two monitors, one of which is a 17-inch LCD. monitor, and the other is a 14-inch CRT monitor. Each module in the system can be debugged and operated independently, or can be connected and configured for joint tr*ning. Engineering bridges are used to realize system connections between functional areas. The virtual simulation software for electrical installation of building buildings and smart buildings is based on unity3d design. Users can choose different interactive interface sizes according to computer configuration, and six levels of image quality are av*lable. The model in the software can be rotated 360°, enlarged, reduced, and translated. There are assistant prompts during the use of the software, and the content is as follows: A. Wet alarm system 1. System overview: Overview of wet alarm system 2. Equipment awareness: equipped with the best viewing angle, equipment det*ls (displaying the introduction or parameters of the equipment), and exercises (Built-in 6 multiple-choice questions, prompts for correct and incorrect choices), schematic diagram (can be entered into the device from the schematic diagram). Equipment includes: nozzle, water flow indicator, signal butterfly valve, exhaust valve, fire alarm control, high pipe pressure gauge, high water tank, Wia control cabinet, pressure stabilizing tank, flow switch, terminal water testing device, dr*nage facilities, water pump connection alarms, hydraulic alarms, delayers, wet alarms, butterfly valves, check valves, fire pumps, safety pressure regulators, and fire pools. 3. Principle display: Show the working principle of the wet alarm system, three-dimensional animation demonstration, the three-dimensional model is translucent, and the internal water flow can be seen. Equipped with a practice module (built-in 4 multiple-choice questions, with prompts for correct and incorrect choices) 4. Design layout: There are multiple-choice questions and calculation questions, each question is scored, and the correct answer and score will be displayed after submission B. Gas fire extinguishing system 1. System overview: Overview of gas fire extinguishing system 2. Equipment awareness: equipped with the best viewing angle, equipment det*ls (displaying the introduction or parameters of the equipment), exercises (built-in 8 multiple-choice questions, with prompts for correct and incorrect choices), Schematic diagram (access to the device from the schematic diagram). Equipment includes: nozzle, HFC-227 storage bottle, bottle head valve, heptafluoropropane one-way valve, high-pressure hose, gas one-way valve, safety valve, weighing alarm, electromagnetic starter, selection valve, smoke alarm, fire Alarm controller. 3. Principle display: Show the working principle of the gas fire extinguishing system, three-dimensional animation demonstration, the three-dimensional model is translucent, and the internal gas can be seen. Equipped with a practice module (built-in 3 multiple-choice questions, with prompts for both correct and incorrect choices) 4. Design layout: There are 6 multiple-choice questions, each question is scored, and the correct answer and score will be displayed after submission. C. Escape drill: adopted Teaching is conducted in the form of fun games. Escape from the burning room within a limited time. If you make a wrong choice, you will directly enter the score interface. 3. Technical parameters 1. Input power supply: single-phase three-wire ~ 220V ± 10% 50Hz 2. Working environment: temperature -10℃ ~ 40℃, relative humidity ≤ 85% (25℃) altitude < 4000m 3. Device capacity: ≤ 1.0kVA 4. Dimensions: 3120mm×1580mm×2310mm 5. Safety protection: With leakage voltage and leakage current protection, safety indicators comply with national standards
4. This device is oriented to the work process and plans teaching activities in a work-study integration model to complete the following tasks:
1. Intercom access control system installation, wiring and debugging tasks
Ø System component installation tasks
Unit door host, outdoor call module, indoor video intercom module, non-visual intercom module, communication conversion module, network device, management center computer and indoor security Select and detect major components such as detectors, and install the above components to reasonable locations in the corresponding areas.
Ø System wiring tasks
include laying and connecting lines for video intercom access control and indoor security systems.
Ø System debugging tasks
include setting relevant parameters of video intercom access control and indoor security system components, completing outdoor host address settings, indoor extension address settings, IC card distribution and registration, management center computer settings, etc., to enable the outdoor host to call indoor extensions, indoor extensions, etc. Extension call management center, outdoor host call management center, password unlocking, indoor extension active unlocking, card unlocking, video intercom software recording, processing of door opening, alarm information and other functions.
2. Video surveillance system installation, wiring and programming, debugging tasks
Ø System component installation tasks
Selection and testing of all or part of components such as high-speed dome cameras, color dome cameras, matrix hosts, LCD monitors, hard disk recorders, etc., and installing them to Reasonable location of the corresponding area.
ØSystem wiring task
is to complete the line laying and connection of the video surveillance system.
ØSystem programming and debugging tasks:
Through parameter setting and programming of system modules, video monitoring and screen switching of monitors, high-speed ball-type pan-tilt rotation, focus action control and alarm linkage recording are realized.
3． Indoor security and perimeter protection system installation, wiring and programming, debugging tasks
Ø System component installation tasks
shock detectors, glass break detectors, temperature detectors, smoke detectors, combustible gas detectors, infrared detectors, door sensors, Selection, testing and installation of all or part of infrared detectors, sound and light alarms, alarm buttons, infrared curt*n detectors, large alarm hosts, six-zone alarm hosts, LCD keyboards, multi-channel bus drivers, etc., and their installation to a reasonable location in the corresponding area.
ØSystem wiring task is
to complete the wiring laying and connection of indoor security and perimeter protection systems.
ØSystem programming and debugging tasks
realize indoor security and perimeter prevention alarms through system parameter setting and programming, and perform alarm processing.
4. Patrol system installation and debugging tasks
Ø System component installation task
information point installation.
ØThe system debugging task
realizes the setting of patrol system lines, statistics of patrol data, and generation of reports through system parameter settings.
5. Professional abilities that can be investigated through the implementation of project tasks
1. Implementation ability of building intelligent security wiring
2. Ability to install, wire and debug intercom access control systems
3. Ability to install, wire and debug indoor security and perimeter defense systems
4. Video Monitoring system installation, wiring and debugging capabilities
5. Patrol system installation and debugging capabilities
6. System operation and m*ntenance capabilities
6. System configuration
1. Basic specifications

serial number	Equipment name	Equipment specifications or models	quantity	unit
1	architectural model	It is composed of an aluminum alloy profile frame and a mesh plate for installation and wiring, 3120mm×1580mm×2310mm (length×width×height). It is divided into security areas and management centers. The devices are installed with self-tapping screws and engineering plastic clamps.	1	tower
2	Computer Desk	600mm×600mm×800mm (length×width×height)	1	tower
3	Steel stool	Φ300mm×450mm (circle×height)	1	Bundle
4	Aluminum ladder	900mm×250mm×1200mm (length×width×height)	1	Bundle
5	Engineering plastic clamps	20mm×10mm×11mm (length×width×height)	300	indivual
6	computer	M*nstream brand computers, users need to bring their own	1	tower
7	DDC lighting box	HW-BA5208, HW-BA5210 1 each, a switching power supply, 3 lights, several intermediate relays,	1	indivual

2. System configuration

serial number	Equipment name	Equipment specifications or models	quantity	unit
intercom access control system
1	Color visual outdoor host	GST-DJ6106CI 1. 44 digital buttons, you can select any appropriate number between 1~8999 according to your needs to address the indoor extension. 2. Each outdoor host can be connected to up to 2,500 indoor extensions through the inter-floor distributor. 3. Supports two passwords (resident password, public password) to unlock, which is convenient for users to use and manage. 4. Each household can set a door opening password. 5. Supports duress alarm. When residents enter the duress password when opening the door, the duress alarm can be generated. 6. With anti-tamper alarm function. 7. Support unit multi-door system, each unit can support 1 to 9 outdoor hosts. 8. Password protection function. When the user uses the password to open the door and fls after three attempts, the management center is called. 9. Set the outdoor host and indoor extension addresses online to facilitate project debugging. 10. The visual outdoor host has a built-in infrared camera and infrared light supplement device, which has low requirements for external light. Color visual outdoor hosts need to add visible light illumination to get good nighttime compensation. 11. The outdoor host with IC card supports the classification registration of resident card, patrol card and administrator card. It can perform the operations of swiping the card to open the door and swiping the card to patrol, and can manage up to 900 cards. 12. The unlocking delay time can be set (1~99 seconds). The outdoor unit can control electronically controlled locks and electromagnetic locks (or electric mortise locks) at the same time. (Applicable to outdoor hosts with electromagnetic lock terminals)	1	tower
2	Ordinary wall-mounted indoor extension	GST-DJ6209 1. Can realize intercom or visual intercom with outdoor host, management center and community door station. 2. It has the locking function of the unit door.	1	tower
3	Host installation box	GST-DJ-ZJYM 1. Using CAN bus technology for networking, the system is stable and cost-effective. 2. LCD display, intuitive and easy to understand. 3． It can automatically monitor the door of the unit and display the image of the door of the unit in a loop. 4. Record alarm, fault and operation data in real time. Can be connected to a computer to realize information exchange	1	Only
4	Management center computer	GST-DJ6406	1	tower
5	network device	GST-DJ6327B 1. Can be connected to outdoor host, video switcher and community door station to achieve networking. 2. When used as a villa network device, it can be directly connected to the doorbell. 3. Supports 2 networking methods, matrix networking and hand-in-hand non-matrix networking.	1	Only
6	power box	GST-DY-18V2A	1	Only
7	Inter-layer allocator (4 branches)	GST-DJ6315B 1. The multi-line indoor extension can accept calls and conversations from the outdoor host, community door station, and management center station. 2. Multi-line extensions can actively monitor and call the outdoor host computer and actively call the management center computer. 3. Detect the extension’s help alarm signal and report the help alarm to the management center. 4. Can store indoor extension codes. The indoor extensions connected can be interchanged without coding.	1	Only
8	Communication conversion module	K-7110 1. Connect different RS232/RS485/CAN networks to extend the communication distance and expand the number of bus nodes. 2. Suitable for CANBUS small traffic data transmission, with a transmission rate of up to 500 frames/second. 3. Integrate an independent CAN port and an RS232 (or RS485) port. 4. Can be used in CANBUS laboratories , industrial control, smart buildings and other fields.	1	indivual
9	management software	GST-DJ6000	1	set
10	contactless card	RFID02A	2	open
11	Color visual indoor extension	GST-DJ6825C 1. It has the lock control function of unit door and resident door. 2. Supports multiple indoor extensions in one household, and indoor extensions in the same household can call each other; when the unit has multiple entrances, the outdoor host of the unit can be monitored in turn. 3. Support community information release (used in conjunction with corresponding networking equipment). 4. Provides 8-channel alarm interface to support fire alarm, burglar alarm, door sensor, window sensor, gas leakage and other alarms. 5. Indoor extensions can be expanded with emergency help buttons and have emergency help functions. 6. Provides 30 8-chord music ringtones to choose from. 7. Provides 100mA/12V output to power external sensors . 8. An external alarm bell can be connected to provide 50mA/14.5V~18V output for the alarm bell. 9. With door-to-door intercom function. 10. With interference-free function.	1	tower
Indoor security and perimeter protection systems
12	shock detector	T971A	1	Only
13	glass break detector	PA-456	1	Only
14	heat detector	SS-163	1	Only
15	Smoke Detectors	LH-94(II)	1	Only
16	Combustible gas detector	LH-88(II)	1	Only
17	Passive infrared detector	DS820iT-CHI Working voltage: DC6~15V Working current: 16~35mA Working temperature: -40℃~+49℃ Installation height: About 2 meters Detection angle: 15 degrees Detection range: 6 meters × 6 meters	2	Only
18	Door magnet	HO-03	1	right
19	Infrared through-beam detector	DS422i-CHI dual-beam infrared beam -to-beam distance: 30 meters outdoors and 90 meters indoors	1	right
20	Audible alarm	HC-103 shell: ABS/white Size: 122.272.843mm Working voltage: DC12V Rated current: 280mA Speaker loudness dB/1M: 115 Lampshade color: red	2	Only
twenty one	Home emergency help button	HO-01B	1	Only
twenty two	Passive infrared curt*n detector	DC12V	1	Only
twenty three	Large alarm host	DS7400xi-CHI 1. The DS7400Xi-CHI host can be connected using dual buses, and the length of each bus can reach 1.6KM. 2. The bus connection is flexible and can be connected in star shape or tree shape, which is convenient for construction. 3. The alarm host has strong scalability and is easy to upgrade. The host defense zone capacity can be expanded from 8 defense zones to 248 lines by replacing the bus driver. 4. The DS7400Xi-CHI host adopts manual dialing method to set the defense zone address expansion module, which is not only easy to install, but also the address code will not be lost during system operation. 5. The lock-type defense zone function is very user-friendly, allowing users to automatically disarm when opening the door. 6. 3-zone and 6-zone keyboards can be connected to the bus, which is the first of its kind in a bus-type home security alarm system, allowing one DS7400Xi-CHI host to connect and manage 728 defense zones. 7. The DS7400Xi-CHI host can be connected to alarm management software and can integrate the three major alarm systems of community perimeter alarm, home security, and public area alarm into one management platform. 8. The alarm output is very flexible. The relay output can be made up to 1024 channels. It can follow the partition, follow the event, and follow the defense zone for output. It can achieve one-to-one, many-to-one, and one-to-many output for the defense zone. 9. The DS7400Xi-CHI host hardware and CMS7000 alarm management software are both independently developed by Bosch, with the greatest openness and exchange of internal protocols, resulting in the strongest product compatibility.	1	tower
twenty four	Six defense zone alarm host	DS6MX can work independently or connected to the data bus of DS7400Xi. It can transmit arming and disarming signals as well as alarm information of each zone. 6 programmable defense zones. 3 local outputs. Keyboard programming. 6 sets of passwords. Support wireless defense zones.	1	tower
25	LCD keyboard	DS7447i	1	tower
26	Multiplex bus driver	DS7430	1	Only
27	RS232 printer interface module	DX4010V2-CHI	1	Only
video surveillance system
28	speed dome camera	HAV-8227WHDV Canon color integrated movement, 1/4-inch CCD, 22x optical zoom, 10x digital zoom, resolution 480 lines, with color/black and white automatic switching function, the minimum illumination is 1Lux, the signal-to-noise ratio is greater than 50dB, horizontal rotation range 360 degrees unlimited rotation, horizontal rotation speed 0.05~250 degrees/second, vertical rotation speed 0.05~200 degrees/second, with 64 preset positions, screen menu, pattern scanning function, using a high-end function with complete functions Performance digital DSP design, stable performance, integrated design, compact structure, high reliability, precision motor drive, infinitely variable speed, refined to three million steps per week, smooth operation, no jitter, sensitive control, using RS-485 Bus control, supports Pelco-P, Pelco-D and other protocols.	1	tower
29	color dome camera	HAV-813 1/3-inch SONY CCD, resolution 420 lines, including 3.6 lens, minimum illumination 0.5Lux/F1.2, with automatic electronic shutter, automatic white balance, DC12V drive	1	tower
30	Matrix host	The HAV-8064ZX-8-5 matrix m*nly has 8 video signal inputs, 5 video signal outputs, and a complete front panel control keyboard, including buttons, PTZ joystick, and LCD screen; the camera signal can be switched to any Monitor; monitor switching queue, programming a set of camera inputs to cycle through a monitor; alarm programming; decoder control, capable of driving the camera's pan/tilt lens and backup functions.	1	tower
31	DVR	DH-DVR0404LE-S/N 4-channel BNC video input; 1-channel BNC video output; supports scheduled recording, manual recording, motion detection recording, alarm recording, and motion detection recording & alarm recording; provides backup and editing of hard disk recording data, Support U disk, USB CDRW backup device; support monitor or VGA output connection; 4-way switching of display mode during preview; support partial masking of the image; support alarm processing for partial (or complete) masking of the image; support 2-way playback; support fast playback, Slow playback, single frame and other playback modes, search by recording type and time; support OSD overlay, channel name overlay; local recording status display; local alarm (including abnormal events, motion detection) linkage, alarm schedule (arming/ Disarm), alarm linkage type; remote control support; supports customization of operator user rights. In addition to one administrator, multiple operators can be set through "customized rights", which increases the flexibility of operator safety management; PTZ Left/right/up/down/manual/automatic control; lens aperture/zoom/focus control; light and wiper control	1	tower
32	monitor	YM-14 color picture tube; definition above 420 lines; 2 BNC video inputs; 2 BNC video outputs; 2 BNC audio inputs; 2 BNC audio outputs; Format: PAL/NTSC automatic conversion	1	tower
33	infrared camera	HAV-124F adopts the latest DSP digital signal processing technology 1/4SONY color Ex-View/Hi-Res. Ex-View HAD CCD Resolution: 420 lines (Ex-View CCD) High sensitivity, strong halo suppression ability and high signal-to-noise Compared with automatic electronic shutter (AES), automatic gn control (AGC), automatic white balance (AWB), backlight compensation (BLC), super automatic anti-interference circuit design, infrared irradiation distance 20-30M, resolution: 420 lines, minimum illumination: 0Lux/f1 .2 Infrared light on signal-to-noise ratio: ≥50 Gamma characteristics: r=0.45 Electronic shutter: NTSC:1/60~1/10000 SEC PAL:1/50~1/10000 secretary Infrared irradiation distance: 20- 30M Angle: 60° Infrared light wavelength: 30 unit 840nM Waterproof level: IP65 Lifespan: 20,000 hours Lens: 6MM LENS Automatic gn control: With backlight compensation: ON/OFF Synchronization system: Internal synchronization/power synchronization White balance: Auto	1	tower
34	bolt action	HAV-303 aperture drive mode: video drive/DC drive electronic shutter: 1/50 (1/60) ~ 1/120000 seconds automatic gn compensation: automatic signal-to-noise ratio: >48dB (automatic gn off) pixels: PAL: 542 ( H) × 582 (V) NTSC: 512 (H) × 492 (V) Minimum illumination: 0.1Lux/F1.2 Backlight compensation: On/Off (optional) Gamma correction: >0.45 Video output amplitude: 1.0Vp- p at 75 ohms Key features: Imaging device: 1/3 SONY Super HAD CCD Signal format: PAL/NTSC Horizontal resolution: 420 TV lines Power supply: DC 12V +/-1V	1	tower
35	Bracket	FIH-5001	2	indivual
36	LCD monitor	US-M1701P physical resolution: 1280 (H) × 1024 (V) Video input: CVBS (BNC) × 2, S-Video (Y/C) × 1 (optional)	1	tower
37	harddisk	160G SATA	1	piece
38	single head audio cable		4	root
39	auto iris lens	SSV0358GNB Focal length: 3.5-8mm Aperture: F1.4-360CCD Size: 1/3" Viewing angle: 81.9°	1	indivual
patrol system
40	Patrol inspector	Maximum recording capacity of L-9000 Chinese machine : 30,000; Maximum number of plans: 10 groups; Maximum data per plan: 1440; Maximum number of locations: 1,000; Maximum number of times: 256; Maximum number of events per location: 30 ; Maximum number of states per event: 5. Related technical parameters of the collector: specifications: 1336029mm; weight: 105g; working frequency: 2.4GHz-2.485GHz; storage capacity: 4M FLASH 10,000 pieces of data (expandable); working environment: -30℃-70℃ ;Power supply: 3.6V rechargeable lithium electronic battery	1	tower
41	communication line	L-9000	1	root
42	charger	L-9000	1	indivual
43	information button	ID-EM	6	indivual
44	software	L-A1.0	1	set
Consumables
45	Engineering plastic card		300	indivual
46	23 core wire	black	2	roll
47	23 core wire	red	2	roll
48	16 core wire	yellow	1	roll
49	16 core wire	blue	1	roll
50	Shielded twisted p*r	2 cores	20	rice
51	video cable	SYV75-3	1	roll
52	BNC plug		30	indivual
53	40*25PVC trunking		root	1
54	Number management	Φ3, Φ4	rice	4
Tools
55	Scissors		1	Bundle
56	iron	40W	1	Bundle
57	Wire strippers		1	Bundle
58	screwdriver	small character	2	Bundle
59	screwdriver	small cross	2	Bundle
60	screwdriver	long handle cross	1	Bundle
61	Needle nose pliers		1	Bundle
62	Diagonal pliers		1	Bundle
63	solder wire		1	roll
64	marker pen		2	branch
65	multimeter	3 and a half digits	1	indivual
67	Allen wrench	φ6	1	Bundle

Previous：DYLY-BAS SAS and BAS integrated system application training platform

Next：DYLYP-43 variable frequency constant pressure water supply system training platform