DYGC-09 "Connection and Cooperation" measured drawing training experimental device

Release time：2024-05-15 00:51viewed：times

1. Product Features
1. Practical project: Taking commonly used actual connection and matching components as the tr*ning object;
2. Functional systemization: four-in-one tr*ning mode: looking for parts by looking at pictures, disassembling and assembling components, measuring components, and drawing components; consists of simple The tr*ning process from components to complex components.
3. Popularization of students: small, combined, portable tr*ning devices, in groups of two or three, allowing as many students as possible to get
sufficient tr*ning opportunities.
4. Standardization of teaching: supporting tr*ning instructions, teaching and learning are very convenient and effective. Remarkable;
5. Management facilitation: parts, measurement tools and instructions are all placed in a refined box, making management very convenient.
2. Product parameters

"Connection and Cooperation" Measured Drawing Tr*ning Combination Device
project	Parameters	project	Parameters
Dimensions	40×30×7cm	weight	5(kg)
Commonly used connection and matching components (17 pieces/set)	Threaded connection: external hexagonal bolt connection, internal hexagonal bolt connection, stud bolt connection, screw connection, set screw connection Bearing connection and cooperation: deep groove ball bearing, tapered roller bearing and thrust ball bearing connection and cooperation Key connection and cooperation : Flat key, rectangular spline connection and matching pin connection and matching: Cylindrical, conical pin connection and matching Gear transmission connection and matching: Cylindrical gear transmission, gear and rack transmission, bevel gear transmission, turbine and worm transmission
Measuring and assembly tools	Vernier caliper, outer diameter millimeter, thread template	type	Portable combined type (testing parts, measurement tools and instructions are all placed in a refined color box)
Teaching materials (gift)	1. Practical trning guide and trning report (including electronic draft)

3. Product functions

tr*ning mode	Tr*ning content
1. Trning on looking at pictures to find components; 2. Trning on component disassembly and assembly; 3. Trning on component measurement; 4. Trning on component combination drawing.	Trning 1: Threaded connection drawing trning Trning 2: Bearing connection and coordination drawing trning Trning 3: Key connection and coordination drawing trning Trning 4: Pin connection and coordination drawing trning Trning 5: Gear transmission connection and coordination drawing trning

4. Comprehensive integrated tr*ning virtual simulation system for vocational skills: The model
in the software can be rotated 360°, enlarged, reduced, and translated, and is equipped with universal interactive buttons: return, home page, and help. There are prompts during all virtual simulation tasks, and the software automatically checks the box after completing a task. There are experimental tasks 1 and basic three-dimensional above the tool library. (When the model is rotated, the XYZ space coordinate icon automatically follows the rotation.) A. Plane and three-dimensional: The experimental steps are divided into experimental tasks (text prompt tasks) - building models (drag and drop in the tool library The model is put into the three-projection plane system, and the projection is automatically displayed. There will be a prompt when the selection is wrong) - Change the posture (change by clicking the up, down, left and right arrows) - Select the projection (enter the answer interface, select the three-dimensional projection map completed at this time among the 6 items) ) B. Cutting three-dimensional: The experimental steps are divided into experimental tasks (text prompt tasks) - building the model (drag the model in the tool library into the three-projection plane system, and automatically display the projection) - marking the projection situation (as a three-dimensional projection icon Determine, select the corresponding label symbol in the 14 blank columns) C. Intersecting three-dimensional: The experimental steps are divided into experimental tasks (text prompt tasks) - digging holes (select any digging model, at this time, you will be able to dig holes in the XYZ space coordinates Select any surface, the model will be switched at the same time, and a coordinate slider will appear. According to the displacement of the slider, the model will appear with a corresponding section plane) - aperture change (select 1-4 apertures) - rear through hole - select projection (enter the answer interface) , select the three-dimensional projection image completed at this time among the 8 items) 2. Assembly A, assembly assembly: The experimental steps are divided into experimental tasks (text prompt tasks)-select the assembly model (8 models are optional)-assembly assembly Body (select the tool library model according to the selected model and drag and drop to combine) - Sectioning the combined body (you can select any surface in the XYZ space coordinates, the model is switched at the same time, and a coordinate slider appears. According to the displacement of the slider, the model appears Corresponding section plane)—Select the side projection (enter the answer interface and select the correct side projection among the 3 items based on the known front and horizontal projections) B. Combination picture reading: The experimental steps are divided into experimental tasks (text Prompt task)—Select the combination section view (8 types of pictures are av*lable)—Build the combination model (select the tool library model according to the selected model and drag and drop the combination)—Section the combination (you can select any surface in the XYZ space coordinates, The model is switched at the same time, and a coordinate slider appears. According to the displacement of the slider, the model appears with a corresponding section plane) - Select the left view (enter the answer interface, select the correct left view among the 3 items based on the known m*n view and top view) View) 3. Assembly A, mechanical transmission mechanism : 8 types of mechanisms (worm gear, rack and pinion, screw transmission, out-of-plane meshing gear, in-plane meshing gear, space spur bevel gear, belt drive , ch*n drive) optional , after selecting, the model will appear in the toolbar. Drag and drop the model freely to combine it. After the combination is completed, the model can be operated. Each mechanism comes with an introduction, video demonstration, and drawing method. There are 6 questions in the answering interface, and each question has 4 options. B. Gear oil pump: Select the tool library model according to the prompts to gradually build the model. You can choose the introduction, drawing method, and animation principle (the internal movement principle of the model is visible) to learn. There are 2 questions in the answering interface, each with 4 options. C. Mechanical mechanism construction: 2 types of mechanisms (2-DOF robotic arm, 3-DOF robotic arm). Select the tool library model according to the prompts to gradually build the model. After the combination is completed, the model can be operated. Each mechanism comes with an introduction and video demonstration. . There are 2 questions in the question-answering interface (which can only be entered after both models have been built), each with 4 options.

Previous：DYZT-8C computer drawing experimental device

Next：DYGC-07 "Typical Parts" measured drawing training experimental device