DY-353 Flocculation Tank Training Platform

Release time：2024-06-30 05:30viewed：times

1. Experimental purpose: The clarification process
in water treatment usually includes coagulation, sedimentation and filtration, and the treatment objects are m*nly suspended matter and colloidal impurities in the water. After the raw water is added with drugs, the suspended matter and colloid in the water are coagulated to form large-particle floccules, and then gravity separation is carried out through the sedimentation tank. The grid (grid) flocculation tank is a water purification structure with two functions of coagulation and flocculation sedimentation. This model is an experimental device that shows the internal structure of the flocculation reaction tank and the grid (grid) flocculation tank. It is hoped to achieve the following purposes:
1. Through direct observation of the organic glass device, deepen the understanding of the various components;
2. Master the water flow direction and operation method of the grid (grid) flocculation tank, and observe the conditions of floc formation and precipitation.
2. M*n technical indicators and parameters:
1. Ambient temperature: 5℃～40℃
2. Processed water volume: 40L/h,
3. Overall dimensions of the device: length×width×height=1100mm×400mm×1500mm
4. Working power supply: AC220V±10%, 50Hz, single-phase three-wire system, power 200W, safety protection: with grounding protection, leakage protection, overcurrent protection,
3. M*n configuration:
1. 1 raw water tank: white PP board material, thickness 10mm, 400×400×400mm, with a dr*n valve installed on the bottom plate,
2. 1 clean water tank: white PP board material, thickness 10mm, 300×400×400mm, with a dr*n valve installed on the bottom plate,
3. Equipped with 1 raw water tank stirring motor , 1 set of 304 st*nless steel stirring paddle; (power 15W, speed 120rpm), (including 1 speed regulator)
4. 1 set of grid pool, made of transparent plexiglass, with a wall thickness of 10mm;
5. 1 set of flocculation tank, made of transparent plexiglass, with a wall thickness of 10mm;
6. 1 set of anti-corrosion lifting magnetic water pump, with a flow rate of 16-19 (L/min), a head of 2.7-3.4 (m), and a power of 20W;
7. 1 stirring motor, 1 set of 304 st*nless steel stirring paddle; (power 15W, speed 120rpm), (including 1 speed regulator);
8. 1 rotor flowmeter, (range 6-60L/H);
9. Power control system: 1 double-sided matte dense-gr*ned spray-p*nted electric control box, a leakage protector (Delixi brand), a voltmeter, a lockable push button switch;
10. Matching UPVC connecting pipes and valves (Zhongc* brand).
11. St*nless steel frame test bench (30mm×30mm st*nless steel square tube, with casters for universal wheels with locking feet) etc.
12. Virtual simulation software for electrical installation of building and intelligent building Based on unity3d design, users can choose different sizes of interactive interface according to computer configuration, and can choose six levels of image quality. The model in the software can be rotated 360°, enlarged, reduced, and translated. There are assistant prompts during the use of the software, the contents are as follows: A. Wet alarm system 1. System overview: Overview of wet alarm system 2. Equipment recognition: It has the best viewing angle, equipment det*ls (displaying the introduction or parameters of the equipment), exercises (built-in 6 multiple-choice questions, with prompts for correct and wrong choices), schematic diagram (you can enter the equipment from the schematic diagram). Equipment includes: sprinkler, water flow indicator, signal butterfly valve, exhaust valve, fire alarm control, high pressure gauge, high-level water tank, Weiya control cabinet, pressure regulating tank, flow switch, terminal water test device, dr*nage facilities, water pump connector, hydraulic alarm, delay, wet alarm, butterfly valve, check valve, fire pump, safety pressure regulating valve, fire water pool. 3. Principle display: Display the working principle of the wet alarm system, 3D animation demonstration, 3D model is semi-transparent, and the internal water flow can be seen. Equipped with exercise module (4 built-in multiple-choice questions, both correct and wrong choices are prompted) 4. Design layout: There are multiple-choice questions and calculation questions, each question is scored, and the correct answer and score are displayed after submission B. Gas fire extinguishing system 1. System overview: Overview of gas fire extinguishing system 2. Equipment cognition: It is equipped with the best viewing angle, equipment det*ls (displaying the introduction or parameters of the equipment), exercises (8 built-in multiple-choice questions, both correct and wrong choices are prompted), and schematic diagram (you can enter the equipment from the schematic diagram). The equipment includes: nozzle, HFC-227 storage bottle, bottle head valve, HFC-227 one-way valve, high-pressure hose, gas one-way valve, safety valve, weighing alarm, electromagnetic starter, selection valve, smoke alarm, fire alarm controller. 3. Principle demonstration: Demonstrate the working principle of the gas fire extinguishing system, 3D animation demonstration, 3D model is semi-transparent, and the internal gas can be seen. Equipped with practice module (3 built-in multiple-choice questions, with prompts for correct and wrong choices) 4. Design layout: There are 6 multiple-choice questions, each with a score, and the correct answer and score will be displayed after submission. C. Escape drill: Teaching in the form of fun games, escaping from the burning room within a limited time, and wrong choices will directly enter the score interface. Similar products:

ZR-348
Mechanical Flocculation Tank

M*n parameters and configuration:
flocculation water volume: 0.54L/h, flocculation time: 10min, mechanical stirring speed: 40 rpm (adjustable), device dimensions: 800mm×400mm×1300mm, power supply 220V, power 600W, configuration: 1 set of plexiglass flocculation tank, 1 water distribution tank, 1 water pump, 3 stirring motors, 3 speed regulators, 1 rotor flowmeter, 1 electric control box, leakage protection switch, push button switch, connecting pipes and ball valves, st*nless steel stand with movable wheels, etc.

ZR-353 type
Grid (grid) flocculation tank

M*n parameters and configuration:
Processed water volume: 40L/h, device dimensions: 1300mm×450mm×1500mm, power supply 220V, power 200W, configuration: 1 grid tank, 1 flocculation tank, 1 water distribution tank, 1 water pump, 1 speed regulating motor, 1 speed regulator, 1 agitator, 1 flow meter, 1 electric control box, leakage protection switch, push button switch, connecting pipes and ball valves, st*nless steel stand with movable wheels, etc.

Previous：DY-350 Iron and manganese removal training platform

Next：DY-355 Composite Artificial Wetland Demonstration and Training Platform