DY-106 Clarifier Training Platform

Release time：2024-06-26 08:30viewed：times

1. Experimental purpose: The purpose of the dynamic model
experiment of water treatment structure is to cooperate with the relevant content taught in water treatment, intuitively understand the type of structure, internal structure, and the flow trajectory of water in the structure, and deepen the understanding of the content learned.
Through this experiment, we hope to achieve the following goals:
1. Understand the structure, working principle and operation method of the pulse clarifier;
2. Observe the role and characteristics of the alum floc in forming a suspended layer.
2. Experimental principle:
The clarifier uses the contact flocculation effect of the alum floc in the suspended layer on the suspended particles in the raw water to remove suspended impurities in the raw water. The mechanism of contact flocculation includes: the collision between alum flocs and alum flocs, alum flocs and suspended impurities in the raw water, and the adsorption of alum flocs on suspended particles and other impurities in the raw water. After the contact flocculation is completed, the alum flocs (i.e. the increased alum flocs) are separated from the raw water and enter the mud collecting bucket to clarify the raw water. The reaction and sedimentation separation processes are completed in the clarifier respectively.
III. M*n technical indicators and parameters:
1. Ambient temperature: 5℃～40℃
2. Processed water volume: 0.5m3/h
3. Rising flow rate: 1mm/sec
4. Pulse cycle: water inlet time is 30～36 seconds, water outlet time is 10～12 seconds. (This is the production cycle, the device cycle is slightly faster).
5. Dimensions of organic glass clarifier: Ø400mm×650mm,
6. Overall dimensions of the device: 900 mm×500 mm×2000mm,
7. Working power supply: AC220V±10%, 50Hz, single-phase three-wire system, power 500W, safety protection: with grounding protection, leakage protection, overcurrent protection;
IV. M*n configuration:
1. 1 set of pulse clarifier: transparent organic glass material, thickness 10mm, including pulse generator, mixed reaction system (including water distribution channel, water distribution pipe and flow stabilizing plate), clarification system (including suspension layer, clear water layer, sludge concentration layer, water collection weir); 2.
1 set of pulse water distribution pipes, 1 set of pulse triangle plate folding plate, 2 mud meters, 1 set of mud discharge pipes, 1 set of clean water outlet pipes, 1 set of water outlet sump; 3. 1 set of
anti-corrosion water inlet pump: flow rate: 27~32 (L/min), head: 3.1~4.3 (m)
4. Raw water tank and clean water tank: white PP board, thickness 10mm, with a dr*n valve installed on the bottom plate to dr*n the water.
5. Flow measurement and regulation: rotor flowmeter, 1 sewage flow (range 100-1000L/H);
6. Raw water tank equipped with 1 motor
stirrer, 1 set of 304 st*nless steel stirring paddles; (power 25W, speed 150rpm), 7. Experimental table (10mm thick PP white board),
9. Power control system: 1 double-sided matte dense pattern spray-coated electric control box, leakage protector (Delixi brand), voltmeter, lockable button switch, wire pipe, etc.
10. Matching UPVC connecting pipes and valves (Zhongc* brand).
11. St*nless steel frame experimental table (30mm×30mm st*nless steel square tube, equipped with casters for universal wheels with locking feet), etc.
12. Virtual simulation software for electrical installation of building and intelligent building Designed based on unity3d, users can choose different sizes of interactive interface according to computer configuration, and can choose six levels of image quality. The model in the software can be rotated 360°, enlarged, reduced, and translated. There are assistant prompts during the use of the software, as follows: A. Wet alarm system 1. System overview: Overview of wet alarm system 2. Equipment recognition: It has the best viewing angle, equipment det*ls (displaying the introduction or parameters of the equipment), exercises (built-in 6 multiple-choice questions, with prompts for correct and wrong choices), schematic diagram (you can enter the equipment from the schematic diagram). The equipment includes: sprinkler, water flow indicator, signal butterfly valve, exhaust valve, fire alarm control, high pressure gauge, high-level water tank, Wia control cabinet, pressure regulating tank, flow switch, end water test device, dr*nage facilities, water pump connector, hydraulic alarm, delay, wet alarm, butterfly valve, check valve, fire pump, safety pressure regulating valve, fire water tank. 3. Principle display: Display the working principle of the wet alarm system, 3D animation demonstration, 3D model is semi-transparent, and the internal water flow can be seen. Equipped with exercise module (4 multiple-choice questions are built-in, and there are prompts for correct and wrong choices) 4. Design layout: There are multiple-choice questions and calculation questions, each of which is scored, and the correct answer and score are displayed after submission B. Gas fire extinguishing system 1. System overview: Overview of gas fire extinguishing system 2. Equipment recognition: There are optimal viewing angles, equipment det*ls (displaying the introduction or parameters of the equipment), exercises (8 built-in multiple-choice questions, and there are prompts for correct and wrong choices), and schematic diagrams (you can enter the equipment from the schematic diagram). The equipment includes: nozzles, HFC-227 storage bottles, bottle head valves, heptafluoropropane check valves, high-pressure hoses, gas check valves, safety valves, weighing alarms, electromagnetic starters, selection valves, smoke alarms, and fire alarm controllers. 3. Principle display: Display the working principle of the gas fire extinguishing system, 3D animation demonstrations, and 3D models are semi-transparent, and the internal gas can be seen. Equipped with practice module (built-in 3 multiple-choice questions, with prompts for correct and wrong choices) 4. Design and layout: There are 6 multiple-choice questions, each with a score, and the correct answer and score will be displayed after submission C. Escape drill: Teaching in the form of fun games, escaping from the burning room within a limited time, and wrong choices will directly enter the score interface. Similar products:

ZR-106 type Pulse clarifier device	Mn parameters and configuration: water treatment capacity: 0.8m3/h, device dimensions: 900 mm×600 mm×2000mm, power supply 220V, power 370W, configuration: 1 set of organic glass pulse clarifier, water inlet pipe, vent pipe, 1 water pump, 1 water distribution tank, 1 rotor flowmeter, connecting pipe and ball valve, 1 electric control box, 1 set of leakage protection switch, 1 push button switch, 1 set of stnless steel stand with mobile wheels, etc.
ZR-107 type Hydraulic circulation clarifier device	Mn parameters and configuration: Processed water volume: 0.17~0.25m3/h, size of plexiglass clarifier: Ø500mm×600mm, device overall dimensions: 800mm×500mm×1500mm, power supply 220V, power 200W, configuration: plexiglass clarifier, 1 water tank, 1 rotor flowmeter, 1 water pump, 1 electric control box, connecting pipe valves and 1 set of stnless steel stand with movable wheels.
ZR-108 Mechanical Acceleration Clarifier	Mn parameters and configuration: Processed water volume: 0.3~0.5m3/h, Clarifier size: Ø 500mm×600mm, Device dimensions: 800 mm×600 mm×1400mm, Power supply 220V Power 400W, Configuration: Including all components of the clarifier, 1 water distribution tank, 1 speed-regulating impulse motor, 1 speed regulator, 1 flow meter, 1 water pump, connecting pipes and ball valves, 1 electric control box, leakage protection switch, 1 set of stnless steel stand with movable wheels, etc.

Previous：DY-101 Air Flotation Training Platform

Next：DY-109 Sedimentation Tank Training Platform