DY-157 Activated Carbon Adsorption Training Device

Release time：2024-06-22 13:00viewed：times

1. Experimental purpose:
The activated carbon treatment process uses adsorption to remove odors, cert*n ions, and organic pollutants that are difficult to biodegrade. In the adsorption process, the specific surface area of activated carbon plays a major role. At the same time, the solubility of the adsorbed substance in the solvent also directly affects the adsorption rate. In addition, the pH level, temperature changes, and the degree of dispersion of the adsorbed substance also have a cert*n effect on the adsorption rate.
This experiment uses the intermittent and continuous adsorption method of activated carbon to determine the adsorption capacity of activated carbon for cert*n impurities cont*ned in water. It is hoped to achieve the following purposes:
1. Master the basic operation process of the adsorption experiment;
2. Deepen the understanding of the basic principles of adsorption;
3. Master the physical meaning and function of the adsorption isotherm;
4. Master the data processing method of the activated carbon adsorption experiment;
5. Understand the adsorption performance of different activated carbons and their selection methods.
2. M*n technical indicators and parameters:
1. Ambient temperature: 5℃～40℃
2. Activated carbon adsorption column: Φ100mm×2000mm (2 groups),
3. Device dimensions: 1000mm×600mm×2200mm
4. Working power supply: AC220V±10%, 50Hz, single-phase three-wire system, power 200W, safety protection: with grounding protection, leakage protection, overcurrent protection,
3. M*n configuration:
1. 2 activated carbon adsorption columns (in parallel): transparent organic glass material, wall thickness 6mm, Φ100mm×2000mm; with water inlet pipe, dr*n pipe, backwash inlet pipe, backwash outlet pipe, emptying pipe, sampling port, etc.;
2. 1 raw water tank (white 10mm thick PP plate), with a dr*n valve installed on the bottom plate to facilitate the dr*nage of water;
3. Equipped with 1 raw water tank motor stirring, 1 set of 304 st*nless steel stirring paddle; (power 15W, speed 120rpm),
4. 1 anti-corrosion magnetic water inlet pump, flow rate: 27~32 (L/min), head: 3.1~4.3 (m),
5. 2 water inlet flowmeters and backwash flowmeters (range 10-100L/H),
6. 10 copper sampling ports; specification Ø10mm
7. Equipped with 2 sets of activated carbon fillers (filler height: 60~70% column height);
8. 2 large filter caps,
9. Power control system: 1 double-sided matte dense pattern spray-coated electric control box, leakage protector (Delixi brand), voltmeter, lockable button switch, wire pipe, etc.
10. Matching UPVC connecting pipes and valves (Zhongc* brand).
11. St*nless steel frame laboratory table (30mm×30mm st*nless steel square tube, equipped with casters as universal wheels with locking feet), etc.
Similar equipment:

ZR-158 type Activated carbon adsorption experimental device (6 pieces)	Mn parameters and configuration: Activated carbon adsorption column size: Φ35mm×1000mm 6 pieces, overall dimensions: 1000mm×600mm, power supply 220V power 200W, configuration: Each set of test equipment is composed of three activated carbon columns connected in series, two groups, consisting of plexiglass tubes, activated carbon layers, partitions, rubber races, 1 water distribution tank, 1 water pump, 2 water inlet flow meters, 1 set of activated carbon fillers, 1 electric control box, leakage protection switch, push button switch, connecting pipes and ball valves, and a stnless steel stand with movable wheels.
ZR-243 type Multifunctional activated carbon adsorption and softening device	Mn parameters and configuration: Processed water volume: 50-70L/h, device dimensions: 23000mm×500mm×2100mm, power supply 220V, power 400W, configuration: 1 set of organic glass activated carbon adsorption column, 1 set of organic glass ion exchange column, 1 intermediate water tank, 1 soft water tank, 1 drnage trough, 1 polypropylene salt liquid tank, 1 water pump, 2 water inlet flow meters, 1 set of activated carbon filler, 1 set of resin filler, 1 electric control box, leakage protection switch, push button switch, connecting pipes and ball valves, st*nless steel stand with movable wheels, etc.
ZR-244 type Activated carbon adsorption purification device (4-column gas-water backwash)	Mn parameters and configuration: Activated carbon adsorption column: Φ100mm×2000mm (4 groups), device dimensions: 1100×800×2200mm, power supply 220V, power 300W, configuration: 4 sets of activated carbon adsorption columns, equipped with 4 sets of activated carbon layers, 2 water pumps, 1 fan, 4 large filter caps, 20 copper valve sampling ports, 4 water inlet flow meters and backwash flow meters, 1 PVC water distribution tank, 1 electric control box, leakage protection switch, push button switch, connecting pipes and ball valves, stnless steel stand with movable wheels, etc.
ZR-572-I activated carbon adsorbs sulfur dioxide in the gas	Mn parameters and configuration: experimental gas volume 10~15m3/h, SO2 purification efficiency greater than 95%, activated carbon adsorption tower size Φ100×1000mm, device dimensions: length 1200 width 400 height 1800mm, power supply: 220V, power 500W, configuration: including 1 set of small organic glass buffer, 1 set of three-stage activated carbon adsorption tower, 1 set of tl gas washing tank, 1 set of adsorption tank, 1 set of activated carbon filler, 1 fan, 1 set of SO2 gas and cylinder (10 liters), 1 pressure reducer, 1 gas flow meter, 1 electric control box, leakage protection switch, push button switch, 1 batch of connecting pipes, st*nless steel bracket with movable wheels, etc.
ZR-572-II data acquisition activated carbon adsorption purification of SO2 in gas	Mn parameters and configuration: experimental gas volume 10~15m3/h, SO2 purification efficiency greater than 95%, activated carbon adsorption tower size Φ100×1000 mm, device dimensions: length 1200mm width 400mm height 1800mm, power supply: 220V power 500W, configuration: 1 set of microcomputer SO2 inlet and outlet concentration detection, 1 set of wind pressure detection, 1 set of 11-inch color LCD touch screen, 1 set of data processing and analysis system, 1 communication interface, 1 set of online temperature and humidity detection, 1 set of micro printer, including 1 set of small organic glass activated carbon gas generating device, 1 set of three-stage activated carbon adsorption tower, 1 set of tl gas washing tank, 1 set of activated carbon adsorption tank, 1 set of activated carbon filler, 1 fan, 1 gas flowmeter, 1 set of SO2 gas and cylinder (10 liters), 1 pressure reducer, 1 SO2 gas flowmeter, 1 electric control box, leakage protection switch, push button switch, 1 batch of PVC connecting pipes, st*nless steel bracket with movable wheels, etc.
ZR-576-I Activated carbon moving bed adsorption experimental device (automatic control, full set of st*nless steel, with activated carbon regeneration)	Mn parameters and configuration: experimental gas volume 4m3/h, organic matter purification efficiency 90%, regeneration heater power: 2kw adsorber diameter: Φ100mm height 1300mm device dimensions: 2100×450×2300 mm, power 220V power 3200W, configuration: the equipment is equipped with 1 set of three-stage activated carbon moving bed adsorber, 1 set of organic gas generator, 1 set of gas mixing buffer, 2 fans, 1 suction fan, 2 sets of activated carbon moving motors, 2 sets of speed regulators, 1 set of heaters, 1 set of temperature control system, 1 set of coolers, 1 set of cooling system, 1 set of fire retardant buffer box, 8 sets of temperature control sensors , 5 sets of sampling ports, 1 instrument control cabinet. It is composed of 1 set of methyl alcohol gas and cylinder (8 liters), 1 pressure reducer, 2 gas flow meters, 1 electric control box, leakage protection switch, push button switch, 1 batch of stnless steel connecting pipes and ball valves, and st*nless steel bracket with moving wheels.
ZR-576-II data acquisition activated carbon moving bed adsorption experimental device (automatic control, full set of st*nless steel, with activated carbon regeneration)	Mn parameters and configuration: experimental gas volume 4m3/h, purification efficiency of organic matter 90%, regeneration heater power: 2kw stnless steel adsorber diameter: Φ100mm height 1000mm device size: 2100mm×450mm×2300 mm, power supply 220V power 3200W, configuration: 1 set of microcomputer formate gas inlet and outlet concentration detection, 1 set of online wind pressure detection, 1 set of online temperature and humidity detection, 1 set of 11-inch color LCD touch screen, 1 set of data processing and analysis system; 1 set of computer communication interface, 1 set of micro printer, configuration: the equipment is equipped with 1 set of three-stage activated carbon moving bed adsorber, 1 set of organic gas generating device, 1 set of gas mixing buffer, 2 sets of fans, 1 set of suction fan, 2 sets of activated carbon mobile motors, 2 sets of speed regulators, 1 set of heater, 1 set of temperature control system, 1 set of cooler, 1 set of cooling system, 1 set of fire-blocking buffer box, 8 sets of temperature control sensors, 5 sets of sampling ports, and 1 automatic instrument control cabinet. It consists of 1 set of acetone gas and cylinder (8 liters), 1 pressure reducer, 2 gas flow meters, 1 electric control box, a leakage protection switch, a push button switch, 1 batch of stnless steel connecting pipes and ball valves, and a stnless steel bracket with movable wheels.
ZR-577-I Activated Carbon Temperature Variable Adsorption Experimental Device (Automatic Control St*nless Steel)	Mn parameters and configuration: adsorption efficiency 90%, gas processing volume: 2-4m3/h, stnless steel adsorber outer diameter: Φ100mm height 1000mm; adsorption temperature 0-70 degrees, regeneration heater power: 2kw, device dimensions: 2200mm×500mm×2000 mm, power 220V power 4000W, configuration: 1 set of stnless steel adsorption tower, 1 set of water bath, 1 set of buffer cylinder, 1 set of heater, 2 sets of gas flow meters, 2 vortex jet fans, 1 set of temperature control system, 1 set of cooler, 1 set of cooling system, 1 set of fire-retardant buffer box, 6 sets of temperature control sensors, 6 sets of manual sampling ports, 6 programmable controllers, 1 set of methyl alcohol gas and cylinder (8 liters), 1 pressure reducer, 1 electric control box, leakage protection switch, push button switch, 1 batch of stnless steel connecting pipes and ball valves, st*nless steel bracket with movable wheels, etc.
ZR-577-II data acquisition activated carbon temperature swing adsorption experimental device (automatic control, full set of st*nless steel)	Mn parameters and configuration: adsorption efficiency 90%, gas processing volume: 2-4m3/h, stnless steel adsorber outer diameter: Φ100mm height 1000mm, adsorption temperature 0-70 degrees, regeneration heater power: 2kw, device dimensions: 2200×500×2000 mm, power supply 220V Power 4000W, configuration: 1 set of microcomputer methyl acetylene gas inlet and outlet concentration detection, 1 set of online wind pressure detection, 1 set of online temperature and humidity detection, 1 set of 11-inch color LCD touch screen, 1 set of data processing and analysis system; 1 set of computer communication interface, 1 set of printer, 1 set of stnless steel adsorption tower, 1 set of water bath, 1 set of buffer cylinder, 1 set of heater, 2 sets of gas flow meters, 2 vortex jet fans, 1 set of temperature control system, 1 set of cooler, 1 set of cooling system, 1 set of fire-retardant buffer box, 6 sets of temperature control sensors, 6 sets of manual sampling ports, 6 controllers, 1 set of methyl acetylene gas and cylinder (8 liters), 1 pressure reducer, 1 electric control box, leakage protection switch, push button switch, 1 batch of stnless steel connecting pipes and ball valves, st*nless steel bracket with movable wheels
ZR-581-II Data Acquisition Activated Carbon Adsorption Tower	Mn parameters and configuration: experimental gas volume 10~15m3/h, SO2 purification efficiency greater than 95%, activated carbon adsorption tower size Φ100×1000 mm, device dimensions: length 1200mm width 400mm height 1800mm, power supply: 220V power 500W, configuration: 1 set of microcomputer SO2 inlet and outlet concentration detection, 1 set of wind pressure detection, 1 set of 11-inch color LCD touch screen, 1 set of data processing and analysis system, 1 communication interface, 1 set of online temperature and humidity detection, 1 set of micro printer, including 1 set of small organic glass activated carbon gas generating device, 1 set of three-stage activated carbon adsorption tower, 1 set of activated carbon filler, 1 fan, 1 gas flowmeter, 1 set of SO2 gas and cylinder (10 liters), 1 pressure reducer, 1 SO2 gas flowmeter, 1 electric control box, leakage protection switch, push button switch, PVC connecting pipes and ball valves, 1 batch, stnless steel bracket with movable wheels, etc.
ZR-581-II Data Acquisition Activated Carbon Pressure Swing Adsorption Device	Mn parameters and configuration: adsorption efficiency 90%, gas processing volume: 2-4m3/h, stnless steel adsorber outer diameter: Φ100mm height 1000mm, regeneration heater power: 2kw, device dimensions: 1800×500×800 mm, power supply 220V power 3000W, configuration: 1 set of microcomputer methyl methacrylate gas inlet and outlet concentration detection, 1 set of online wind pressure detection, 1 set of online temperature and humidity detection, 1 set of LCD display, 1 set of data processing and analysis system; 1 set of computer communication interface, 1 set of micro printer, 1 set of stnless steel pressure swing adsorption tower, 1 set of heater, 1 set of gas flow meter, 1 fan, 1 set of temperature control system, 1 set of temperature control sensor, 1 set of methyl methacrylate gas and cylinder (8 liters), 1 pressure reducer, 1 electric control box, leakage protection switch, push button switch, 1 batch of stnless steel connecting pipes and ball valves, st*nless steel bracket with movable wheels

Previous：DY-155 oxygen transfer coefficient determination training device

Next：DY-201 Water Environment Monitoring and Treatment Technology Comprehensive Training Device