DYXNYDC-02 Electric Vehicle Power Battery Classification and Structure Principles Experimental Device
Release time：2024-05-24 19:00viewed：times
1. Product Introduction
1. Made from physical new energy vehicle power batteries;
2. Based on physical batteries, each type consists of two single cells to form a physical model . One of the battery cells is cut and dissected to show the internal structure, and the other is encapsulated in a panel to conduct cognitive teaching and tr*ning on the structure and materials of power batteries.
3. Select new energy battery dissected physical materials (lithium-ion batteries, nickel-hydrogen batteries, fuel cells, lead-acid batteries, supercapacitors); tr*n students to master the basic knowledge of power batteries.
2. Functional features
1. The battery is placed on the platform, and students can understand the structure of different types of batteries.
2. The tr*ning platform consists of a movable platform and a principle panel. The panel is placed vertically to draw a three-dimensional anatomical structure diagram, introduce basic knowledge of batteries, and display basic battery parameters.
3. The tr*ning platform is equipped with four casters for flexible movement, and the casters are equipped with self-locking devices to fix the position.
4. The tr*ning platform is equipped with anatomical parts to display the internal structure of the battery.
5. The equipment frame is constructed of 40mm × 40mm integrated all-aluminum alloy profiles, which is oil-resistant, corrosion-resistant and easy to clean. The countertop is paved with 32mm thick colored high-density composite boards.
6. Mechanical assembly and fitter assembly virtual simulation software: This software is developed based on unity3d, with optional 6-level image quality. It is equipped with the design and virtual disassembly and assembly of reducers and shafting structures, the design and simulation of common mechanical mechanisms , and a mechanism resource library. For a typical mechanical mechanism (virtual disassembly and assembly of a gasoline engine), the software is a whole software and cannot be individual resources.
A. Reducer design and virtual disassembly interface can choose worm gear bevel gear reducer, two-stage expanded cylindrical gear reducer, bevel cylindrical gear reducer, coaxial cylindrical gear reducer, bevel gear reducer, and one-stage cylindrical gear reducer. Gear reducer.
Worm bevel gear reducer: After entering the software, the assembly content is automatically played. Each step in the video has a text description
. Secondary expandable cylindrical gear reducer: After entering the software, the content is played in the form of a video. The video content should include: Part name ( Scan the QR code to see the names of parts), disassembly and assembly demonstration (including disassembly and assembly), virtual disassembly (including overall, low-speed shaft, medium-speed shaft, high-speed shaft, box cover, box seat)
conical cylindrical gear reducer, Coaxial cylindrical gear reducer, bevel gear reducer, first-level cylindrical gear reducer: click to enter and automatically jump to the edrawings interface. The models are all three-dimensional models. By clicking on the parts, the names of the parts are displayed, and the 360° view is av*lable Rotate, enlarge, reduce, translate, and at the same time, the entire reducer can be disassembled and assembled through the moving parts function. At the same time, you can select the home button to return to the original state of the reducer. The bevel gear reducer and the first-stage cylindrical gear reducer have added the function of inserting a cross section, and the cross section can be freely dragged to observe the internal structure of the reducer.
B. Shaft structure design and virtual disassembly and assembly interface optional parts recognition, disassembly and assembly demonstration, and actual operation.
1. Parts recognition: three-dimensional model and part name including helical gear, non-hole end cover, coupling, coupling key, shaft, gear key, hole end cover, shaft sleeve, deep groove ball bearing, any All parts can be rotated 360°
2. Disassembly and assembly demonstration: There are 2 built-in cases. When you move the mouse to the position of a cert*n part (except the base and bearing seat), the part will automatically enlarge and the name of the part will be displayed. It is equipped with disassembly and Assembly button, the function is to automatically complete the disassembly and assembly of the shaft system structure by the software. All three-dimensional scenes can be rotated, enlarged, reduced and translated 360° in all directions.
3. Practical operation: The three-dimensional parts are neatly placed on the table. Students manually select the corresponding parts and move them to the shaft system structure. The parts can be installed only when they are placed in the correct order and in the correct position. There is a restart button to facilitate students to restart. Conduct virtual experiments. When you move the mouse to a cert*n part position (except the base and bearing seat), the part will automatically enlarge and the part name will be displayed.
C. Common mechanical mechanism design and simulation, optional hinge four-bar mechanism design and analysis, I\II type crank rocker mechanism design and analysis, offset crank slider mechanism design and analysis, crank swing guide rod mechanism design and analysis, hinge Four-bar mechanism with integrated trajectory, eccentric linear-acting roller push rod cam , and centering linear-acting flat-bottomed push rod cam .
1. Each mechanism should be able to input corresponding parameters, and the software can automatically calculate the parameters, and can perform motion simulation and automatically draw curves.
D. The mechanism resource library includes 11 types of planar link mechanisms, 5 types of cam mechanisms, 6 types of gear mechanisms, 8 types of transmission mechanisms, 11 types of tightening mechanisms, 6 types of gear tr*n mechanisms, and 8 types of other mechanisms (mechanical equipment simulation)
E , virtual disassembly and assembly of gasoline engines, optional crankcase assembly and disassembly demonstration, crankcase virtual assembly, valve tr*n assembly and disassembly demonstration, valve tr*n virtual assembly
1. Crankcase assembly and disassembly demonstration and valve tr*n assembly and disassembly demonstration both have disassembly button, assembly button, restart, and decomposition observation button. When the mouse is moved to a cert*n part position, the part will automatically enlarge and the part name will be displayed. The software automatically completes the disassembly and assembly of the shaft system structure. When using the decomposition observation button, the 3D model of the crankcase or gas distribution system automatically displays an exploded view, which can be rotated, enlarged, reduced, and translated 360°.
2. The 3D parts of the crankcase virtual assembly and the gas distribution system virtual assembly are neatly arranged When placed on the desktop, students manually select the corresponding parts and move them to the mechanism. The parts can be installed only when they are placed in the correct order and in the correct position. There is a restart button to facilitate students to re-perform the virtual experiment. When you move the mouse to cert*n part locations, the part names are automatically displayed.
3. Technical specifications
1. Equipment dimensions (mm): 700*500*1500 (length*width*height)
2. Panel dimensions (mm): 648*713 (length*width)
3. Input power supply AC220V±10% 50Hz
4. Working temperature -5°～+40°
5. Power battery type: lithium-ion battery (3.2AV10AH, 3.7V10AH), nickel-metal hydride battery (No. 5 1.5v), fuel cell (power generation voltage 0V-0.9V, power generation area 25mm*25mm), lead-acid battery (12V9AH) , Supercapacitor (2.8V3000F).
4. Basic configuration of
new energy power batteries (lithium-ion battery (3.2V10AH, 3.7V10AH), nickel-metal hydride battery (No. 5 1.5v), fuel cell (generation voltage 0V-0.9V, power generation area 25mm*25mm), lead-acid battery (12V9AH), supercapacitor (2.8V3000F)), movable platform and principle teaching board.
5. Practical tr*ning and experimental projects
1. Cognition of new energy vehicle power battery structure types.
2. Terminals and corresponding function recognition and detection of new energy vehicle power batteries.
Wechat scan code follow us
