DYMJ-ZS aluminum alloy injection molding mold training platform

Release time：2024-05-15 19:00viewed：times

Aluminum alloy disassembly and assembly training mold series-injection mold

serial number	name	Mold base specifications (mm)	Detailed description and technical requirements
1	Large water mouth mold	200x200	The single parting surface injection mold is the most widely used, simplest and most typical type of injection mold. Part of the cavity is on the movable mold and the other part is on the fixed mold. The movable mold is equipped with an ejection device to push out the parts and runner aggregate (material handle).
2	Fine nozzle mold	200x200	The mold has a gate with a cross-sectional shape as small as a pin point, which can increase the shear rate of the melt and improve the fluidity of the melt, which is beneficial to mold filling. The gate mark is small and easy to trim, and the gate position can be selected more freely.
3	Front mold Huff mold	200x200	The two petals are vertically parted, and the design is reasonable. It is suitable for plastic parts with large side molding area, shallow side holes or side concavities and small extraction distance. It has compact structure, good rigidity and large extraction force.
4	Front mold row position mold	200x200	Plastic parts have high requirements on appearance, and the fixed mold needs to be equipped with a core-pulling mechanism. The mold has a compact structure, strong rigidity, safety and reliability, and is widely used in large molds.
5	Back mold inner row mold	200x200	Plastic parts have high requirements for appearance, have grooves on the inner wall, and cannot have a sloped roof structure. The fixed mold needs to be equipped with an internal core-pulling mechanism. The mold has a compact structure, strong rigidity, safety and reliability, and is widely used in molds.
6	Diving mouth mold	200x200	The mold can not only automatically cut off the gate when opening the mold, but also the gate can be positioned on the side, end face and back of the product, so that there are no traces of the gate on the outer surface of the product. The latent gate mold structure can be used to simplify the double-parting surface mold structure into a single-parting surface mold structure. One mold has four cavities, and the runner is automatically separated from the product.
7	Inclined top mold	200x200	The molded plastic parts with concave and convex inside are easy to process, compact in structure and reliable. The oblique push rod cooperates with the guide groove. When the push rod moves vertically, the oblique push rod makes relative movement under the action of the guide groove, thereby completing the side core pulling action. .
8	Hot runner mold	200x200	Hot runner molds use thermal insulation or heating methods in the injection mold to keep the plastic in the runner in a molten state. Therefore, when opening the mold, you only need to take out the plastic product without a runner mold structure.
9	Incline guide column mold	200x200	The structure is compact, easy to manufacture and reliable in action. Its structural form is that the inclined guide pillar forms a certain angle with the mold opening direction. Under the action of the mold opening force, the inclined guide pillar and the slider material hole move relative to each other, thereby completing the side core pulling action.
10	Push plate mold	200x200	The push plate demoulding mechanism pushes the product out along the periphery of the product at the parting surface, and is suitable for demoulding large tube products, thin-walled containers and various shell products. Its characteristics include uniform pushing force, smooth movement, the product is not easily deformed, and there are no push marks on the surface of the plastic parts.
11	Rotating tooth pattern mold	200x200	It is a production method for molding deep-pitch, threaded plastic parts of hard materials, and achieving demoulding through relative rotation between the product and the threaded core or ring-shaped product in the mold.
12	Bend pipe mold	200x200	The mold structure for core-pulling within the arc of an elbow often uses mechanical structural parts such as gears, racks, or connecting rods to convert linear motion into a structural form of circular motion, thereby achieving the purpose of arc core-pulling.
13	The ejector pin resets the mold first	200x200	When there is interference between the side core puller and the push rod or when it is inconvenient to place the insert, the ejection system is reset in advance through mechanical components.
14	Push tube mold	200x200	Push tube molds are often used for demoulding cylindrical products. The push tube pushes the product along the entire periphery, so that the product is evenly stressed and has no push-out marks. The core and the concave mold are both located on one side of the movable mold to improve the coaxiality of the product.
15	Rear mold oblique core-pulling mold	200x200	There is an oblique groove on the inside of the plastic product formed by the mold. The mold adopts a fixed template hook and swing bar type sequential parting mechanism, and a push rod is used to push out the product. The purpose of sequential parting is to complete lateral oblique core pulling.
16	Chain forming mold	200x200	The mold adopts 45° split molding, precise positioning of rows, and integrates functions such as point gates and inclined guide pillars to form a product with multiple interlocking circles. For the first time, four interlocking circles were formed, and the molded product was 125×26× 3mm. Through simple operation, the two circles can be interlocked twice to achieve infinite extension of the chain. It is one of the more typical structures in injection molds.
17	The big row position hides the small row position model	200x200	When opening the mold, the inclined guide posts drive the small rows within the large rows to move first. After the small rows are separated from the glue positions, the large rows are then moved. This is suitable for protruding side shapes, deep grooves and glue. Bits of plastic that are too thin.
18	Explosive mandrel	200x200	When the mold is closed, the insert moves along the oblique guide groove on the circular core, so that the periphery of the circular core reaches a closed state. This mold is suitable for plastic products that are round and have grooves inside the round.
19	Two-color mold	200x200	The mold consists of one set of rear molds and two sets of front molds. After one set of front molds and the shared rear mold are used to injection mold the product, the product is then placed on the shared rear mold core, and another set of front molds and the shared rear mold are used for secondary molding. Injection molding is used to form glue spots of different colors or materials on the surface of the product.
20	Color cross-section fine nozzle mold	200x200	The mold has a gate with a cross-sectional shape as small as a pin point, which can increase the shear rate of the melt and improve the fluidity of the melt, which is beneficial to mold filling. The gate mark is small and easy to trim, and the gate position can be selected more freely.

Picture of the finished product (the following picture adopts CNC machine tool finishing, anodizing process, advanced baking paint. Non-sand spray painting process, the surface potholes are smoothed with putty, the mold surface is rough, and the paint surface is matte):
DYMJ-ZS aluminum alloy injection molding mold training platform(图1)

DYMJ-ZS aluminum alloy injection molding mold training platform(图1)

Previous：DYMJ-GY aluminum alloy stamping mold experimental device

Next：DY-S3 transparent stamping simulation training platform