DYTS-658M Traffic DC speed adjustment experiment platform

The AC and DC speed regulation tr*ning device is based on the requirements of the textbook syllabus of "Electric Drive Automatic Control System", "DC Speed ​​Regulation", "AC Variable Frequency Speed ​​Regulation", and "Advanced M*ntenance Electrician (AC and DC Speed ​​Regulation Part)". A set of modern comprehensive motor and drive series tr*ning products launched from curriculum experiments conducted by relevant majors in colleges and universities and vocational tr*ning and technical colleges . The AC and DC speed control experimental device m*nly tr*ns and assesses students' parameter setting and system application capabilities of AC inverters and DC speed control devices. Through the careful design of the AC inverter control circuit and the controlled motor load, students can master communication through experiments. The motor frequency conversion controls various typical working states; through careful design of the m*n loop, control loop and DC motor load of the DC speed regulating device, students can master various typical working states of DC motor speed regulating through practical tr*ning.

2. Performance indicators:

1. Working power supply: ~3N/380V/50HZ

2. Overall machine capacity: ≤1.5KVA

3. Specifications (mm): 1650×700×1580 (left or right).

4. Weight: 300Kg

5. Working environment: temperature -10℃～+40℃, relative humidity <85% (25℃)

3. M*n components:

1. TS power control panel

 (1) AC power supply

Three-phase 380V AC power supply is provided. The AC power output is equipped with over-current protection technology. Inter-phase and inter-line over-current and direct short circuit can be automatically protected. Equipped with a pointer AC voltmeter, which indicates the three-phase grid voltage through a switch.

(2) Stabilized power supply module

1) The output voltage of each channel is 0~30V, which is continuously adjusted by a multi-turn potentiometer. It has a preset overcurrent and overload protection function. The maximum output current is 2A. Each power output has a 0.5-level digital voltmeter indication.

2) Provide 1 DC 220V/1A DC power supply to power the DC motor.

(3) Instrument module

1) There is an AC voltmeter with a measuring range of 0-450V, and 3 is a half-digit display.

2) There is an AC ammeter with a range of 0-5A, and 3 is a half-digit display.

3) There is a DC voltmeter with a measuring range of 0-±300V, and 3 is a half-digit display.

4) There is a DC ammeter with a measuring range of 0-±5A, and 3 is a half-digit display.

(4) Equipped with 1 start, 1 stop and 1 emergency stop button.

(5) There are two round tubes in the large groove on the front of the control panel, which can hang instruments and experimental components. There are multiple small round single-phase three-core 220V power sockets at the bottom of the groove for power supply to instruments and other components. There are three-pole 220V power sockets and three-phase four-pole 380V power sockets on both sides of the control panel.

2. DQ03-1 motor guide r*l, tachometer generator and intelligent digital display tachometer

Including tachometer generator and guide r*ls for fixing the motor, etc. The guide r*l has good flatness, no stress deformation, fine processing, good concentricity, good interchangeability, low motor operating noise, and typical experimental parameters, which can better meet the experimental requirements.

3. DK40 Continental 514C DC speed control system (16A)

Including Continental 514C DC speed control system (16A) m*n engine and peripheral speed control components.

4. GDK28 three-phase asynchronous motor frequency converter

Including Mitsubishi D740 variable frequency speed regulator host (0.75KW) and peripheral speed control components.

5. One DQ09 parallel (separately) excited DC motor (coaxial and the same height as the AC motor), 220V/185W, 1.1A, 1500r/min.

6. One DQ19 calibrated DC dynamometer motor (coaxial and the same height as the AC and DC motors), 220V/355W, 2.2A, 1500r/min.

7. DQ10 three-phase asynchronous motor 380V/220V/100W.

8. DC voltmeter DC300V.

9. Armature ammeter 0~3A

10. Excitation ammeter 500mA

11. Adjustable high-power disk resistance load.

4. Practical tr*ning projects 

(1) Practical tr*ning on AC motor frequency conversion speed regulation system

1. Understanding of AC motors (nameplate) and measurement of cold resistance

2. Understanding the panel of the inverter device

3. Frequency converter parameter setting

4. Basic operating methods of frequency converter

5. Frequency converter digital control three-speed operation

6. Inverter digital control seven-speed operation

(2) Practical tr*ning on DC motor speed control system

1. Understanding of DC motors (nameplate) and measurement of cold resistance

2. Forward and reverse rotation of DC motor

3. Panel understanding of the Continental 514C DC speed regulator device

4. Continental 514C DC speed regulator device switch setting

5. Continental 514C DC speed regulator voltage and current double closed-loop irreversible speed regulation system

6. Continental 514C DC speed regulator, current double closed loop irreversible speed regulation system

7. Continental 514C DC speed regulator voltage and current double closed-loop reversible speed regulation system

8. Continental 514C DC speed regulator speed, current double closed-loop reversible speed regulation system

5. Equipment list

Hot-selling product: Electrician tr*ning bench