Oilfield sewage treatment training device

Oilfield sewage treatment tr--ning device,Solid waste oxygen pile fertilizer tr--ning device

1. Experimental purpose and principle:

After mining crude oil in the Liaohe Oilfield, the nearby refineries were refined, and wastewater was discharged from production devices such as distillation, severe, stacked, coking, and oil tank areas. Oil in the wastewater is mostly suspended or emulsified in the water. In addition to the oil content of the wastewater, it also cont--ns sulfide and phenol. In addition, there are alkaline wastewater excreted during the alkali washing process of oil.

The treatment of wastewater in the refinery generally includes oil removal, sulfur removal, and phenol.

This equipment is designed according to the experimental process process in the Liaoshe Oilfield. The process is reasonable and the effect is good, so that students can achieve the following purpose after learning:

1. Understand the process and technical parameters of this set of equipment;

2. Deepen the understanding of the basic concepts of experiments and improve theoretical and practical knowledge;

3. Through operation, the removal rate of oil can be measured, the removal rate of COD, BOD5, and SS can be measured to improve operating skills.

2. M--n technical indicators and parameters:

1. Environmental temperature: 5 ℃ ～ 40 ℃

2. Treatment of water: 10 ～ 15L/h,

3. Oil content of water inlet: 300 ～ 500 mg/L.

4. Oil content of water out of water: 2 ～ 5 mg/L,

5. Device shape size: 3500mm × 500mm × 1600mm,

6. Electricity working power supply: AC220V ± 10%, 50Hz, single -phase three -line system, power of 1500W, safety protection: ground protection, leakage protection, overcurrent protection

3. M--n configuration:

1. 1 original water tank: white PP plate material, 10mm thickness, 600 × 400 × 500mm, empty valve installed on the bottom plate, which is convenient for cleaning the water;

2. 1 water tank: white PP plate material, 10mm thickness, 400 × 400 × 500mm, empty valve is installed on the bottom plate, which is convenient for cleaning the water;

3. 1 set of paddles from the original water tank mixing motor, 304 st--nless steel mixing paddle; (power 15W, speed 120rpm), (including 1 tone speeder)

4. 1 lactating pool, transparent organic glass material, 10mm wall thickness, ø 200 × 300mm; with a mixing device

5. 1 diagonal oil pool, transparent organic glass material, wall thickness 10mm, 400 × 300 × 500mm, motor scraping system device

6. 1 flat -type --r floating tank, transparent organic glass material, wall thickness 10mm, 400 × 300 × 500mm with motor slag system device

7. Central derivative rectangular contact with 1 oxide pool, transparent organic glass material, 8mm wall thickness, ø350 × 500mm;

Oilfield sewage treatment tr--ning device,Solid waste oxygen pile fertilizer tr--ning device

1. Experimental purpose:

Organic solid waste composting technology is a commonly used solid waste biological conversion technology, which is one of the important ways to stabilize solid waste and harmless treatment.

Through this experiment, I hope to achieve the following goals:

1. Deepen the understanding of the good oxygen and fertilizer of garbage;

2. Understand the various influencing factors and control measures for the process of piles of garbage and oxygen.

2. Experimental principle:

Good oxygen fertilizer in garbage is under the effect of aerobic conditions to transform organic waste. The soluble organic substances in organic waste can be directly absorbed by microorganisms through microbial cell walls and cell membranes. The insoluble colloidal organic substances are first adsorbed outside the microorganism. Extraceral enzyme secreted by microorganisms is decomposed into soluble substances, and the cells are infiltrated. Microorganisms decompose metabolism and synthetic metabolism through their own life activities, oxidize part of the absorbed organic substances into simple inorganic matter, and release the energy required for biological growth and activities; Microbial reproduction produces more organisms.

3. Technical indicators and parameters:

1. Environmental temperature: 30 ℃ ～ 80 ℃,

2. Treatment of garbage: 5 ~ 10L/h,

3. Experimental tank outer diameter (5 350mm × height 500mm)

4. Device shape size: 1200mm × 400mm × 1300mm,

5. Power 220V

6. Power 1000W