Crane circuit experimental device

Crane circuit experimental device,Comprehensive tr--ning description of the driver system

1. Basic requirements

Bridge crane electrical skills tr--ning device (semi -real object) adds 20/5T bridge crane simulation semi -real models. Through the interface, the crane electrical part is connected to the physical model to show all the motion processes of the crane, which is more authentic. Audio.

2. Structure requirements

1.20/5T bridge crane semi -solid simulation model is designed with reference to the actual 20/5T bridge crane, and is designed according to a cert--n size ratio;

2. The operation of the electrical part of this set of installations can achieve the various movements of the 20/5T bridge crane.

3. All the contacts of the crane electrical, set the corresponding test points on the panel of the device to facilitate students to detect and judge, and at the same time, a fault exclusion switch is also set under the panel;

4. Through the fault setting, students can truly understand the connection between the fault point and the actual lathe, so that students can master the practical ability of the actual electrical line m--ntenance.

5. All fault points settings are behind the control panel, the front is the operating surface and electrical component.

4. Tr--ning project requirements

1. Familiar with institutions and principles of common low -voltage electrical appliances;

2. Circuit circuit analysis;

3. By observing the movement of the machine tool model, understand the actual movement of the machine tool;

4. Through measurement to find out the fault point in the line, the f--lure of the bed is excluded;

5. Set the fault point as a skill assessment device for m--ntenance electricians;

Crane circuit experimental device,Comprehensive tr--ning description of the driver system

Various models can be adopted

Product introduction:

The device uses the original car engine and the physical object of the transmission system for section, and comprehensively displays the composition of the engine and the transmission system. It is suitable for teaching needs for car engines and theoretical teaching and disassembly tr--ning of automotive engines and transmission systems.

Features:

1. Use real original car engines and transmission systems to perform section processing to fully display the composition of the engine and the transmission system.

2. From the three -phase gear deceleration induction motor to drive the engine crankshaft to do low -speed operation, the real demonstration of the power transfer process from the engine to the drive wheel.

3. The tr--ning table is installed with a safe protective cover.

4. The tr--ning desk provides a working platform for students to disassemble the engine and the transmission department.

5. Machinery assembly and fitter assembly virtual simulation software: This software is developed based on Unity3D, which can choose 6 -level image quality. It has the design and virtual disassembly of the reducer and shaft structure, the design and simulation of common mechanical institutions, institutional resource libraries, institutional resource libraries. Typical mechanical institutions (virtual disassembly of gasoline engines), software is an overall software, which cannot be separate resources.

A. Turbine design and virtual disassembly interface can be selected from turbine sn--l pole cone gear reducer, second -level pilot gear reducer, conical cylindrical gear reducer, coaxial cylindrical gear reducer, cone gear reducer, first -class cylindrical, first -class cylindrical, Gear reducer.

The turbine sn--l tapered gear reducer: automatically play the assembly content after entering the software. Each step in the video has text description

Second -level unfolding cylindrical gear reducer: After entering the software, use the video to play content in the form of video. The video content should include: the name of the parts (scanning the QR code can see the part of the parts), the disassembly presentation (including disassembly, assembly), virtual disassembly Installation (including overall, low -speed shaft, mid -speed axis, high -speed shaft, box cover, box seat)

Cone cylindrical gear reducer, coaxial cylindrical gear reducer, conical gear reducer, first -class cylindrical gear reducer: After clicking, automatically jump to the Edrawings interface. The models are all three -dimensional models. It can rotate, zoom in, reduced, and translated at 360 °. At the same time, the entire reducer can be disassembled and assembled through the function of mobile parts. At the same time, you can select the homepage button to return to the initial state of the reducer ***. The cone gear reducer and first -class cylindrical gear reducer increase the plug -in horizontal surface function, which can freely drag the horizontal surface to observe the internal structure of the reducer.