New type of fluid mechanics comprehensive test training device

New type of fluid mechanics comprehensive test tr--ning device,"Typical Parts" measured drawing tr--ning device

Features:

1. This test table is a new type of fluid mechanics comprehensive test table. The structure is small and the layout is reasonable.

2. Test water tanks and pipelines adopt thick wall high -quality, transparent organic glass pipes. The experimental phenomenon is clear, which is convenient for students to observe.

3. The equipment is a self -propelled frame structure, and the feet are installed to facilitate the disassembly m--ntenance and handling of the system.

4. Device design can be observed at 360 degrees to achieve comprehensive teaching and experiments.

Purpose:

1. Suitable for engineering fluid mechanics (hydropower) teaching experiments.

2. It can be used for Renault experiments, Bernoulli experiments, along the resistance experiment, local resistance experiments, and Wenqili traffic measurement test experiments.

M--n configuration:

Renault experimental tube, Bernoulli experimental tube, along the barrier resistance tube, local resistance tube, water pump, stopwatch, glass thermometer, pressure meter, scale tape, tank, measurement water tank, metering water tank, water storage tank, indicator liquid, indicator liquid solution Box, st--nless steel framework.

Technical Parameters:

1. Operating environment: temperature 0-40 ° C, relative humidity: ≤90%RH, power supply: 220V/50Hz. Can be continuously operated.

2. Renault tube: 1100mm in length, inner diameter φ15mm, organic glass.

3. Beru Liber: The total length is 1100mm, the inner diameter φ20mm and φ14mm, the organic glass tube is made, and the dynamic and static head of each change is found according to the two points.

4. Follow -range resistance tube: 1100mm in length, inner diameter φ14mm, organic glass, and the distance between the two pressure measurement points: 800mm.

New type of fluid mechanics comprehensive test tr--ning device,"Typical Parts" measured drawing tr--ning device

1. Product characteristics

1. Project practicalization: Taking typical actual parts as tr--ning objects;

2. Systematic functional: look at the tr--ning mode of trinity of parts, parts, and parts drawing, and parts drawing;

Views, three views, and multi -view parts from simple to complex tr--ning.

3. The popularization of students: small, combined, portable tr--ning devices, a group of two or three people, so that as much as possible students get

Full tr--ning opportunities;

4. Standardization of teaching: supporting and guidance books, teaching and learning are very convenient, and the teaching effect is significant;

5. Management convenience: parts, measurement tools and guidance books are placed in a refined box, which is very convenient to manage.

2. Product parameters

"Typical Parts" measured drawing tr--ning combination device

Ineximum parameter project parameters

The size 40 × 30 × 7cm weight 5 (kg)

Typical parts

(24 pieces/set) One view parts: light shaft, copper sleeve, pad, etc.

Two view parts: rectangular, bonding slot shaft, belt wheel, method bar, couplet, bracket, etc.

Three view parts: base, low -speed shaft, bearing seat, etc.

Multi -view parts: piston, valve body, etc.

Measurement toolbar crickets, thousands of outer diameters, arc models and other types of portable portfolios (detection parts, measurement tools and

The guidance books are placed in a refined color comprehensive box)

Teaching data tr--ning guidance and tr--ning report (including electronic drafts);