Automatic transmission anatomy Demonstration Training Desk

Automatic transmission anatomy Demonstration Tr--ning Desk,Rear axle assembly disassembly tr--ning device

1. Product introduction

The equipment uses anatomical electronic control automatic transmission to become the foundation. Use single -phase gear deceleration sensor motor to make power sources. Using high -voltage gas to promote oil components to achieve the shift process of the transmission. Practicing operations such as vacancies, forward gear and reversing operations can fully display the working process of the internal structure of the electronically controlled automatic transmission and the work process of the oil components of each gear.

It is suitable for the school's teaching needs for automatic transmission theory and m--ntenance tr--ning.

2. Functional characteristics

1. Real and running anatomical automatic transmission, a single -phase gear deceleration sensor motor drive from the adjustable speed speed, can perform the work conditions such as gear display, vacancy, forward gear operation, and reverse gear operation. Fully display the internal composition and work process of the automatic transmission.

2. Each brake and clutch of the automatic transmission is promoted by a separate --r path. The automatic transmission control device selects the signal of the switch of the switch according to the received multi -function switch and gear to control the corresponding solenoid valve actions to connect Tolerance to control the --r path of the corresponding clutch and brake to achieve the shift process of the transmission.

3. A brief diagram of the original vehicle automatic transmission structure, working schematic diagram, and the working conditions of the oil components of different gears; students can intuitively compare each chart and physical objects, analyze the transmission routes of the transmission and the oil components of each oil element. work process.

Automatic transmission anatomy Demonstration Tr--ning Desk,Rear axle assembly disassembly tr--ning device

1. Function Introduction

1. Use Volkswagen Passat rear bridge assembly (complete accessories, easy to disassemble), and install it on a dedicated flipper. The use of a deceleration agency can rotate the front bridge to rotate any angle and lock at any position, so that students can disassemble and assemble students from different angles.

2. Place the oil disk at the bottom to facilitate the centralized storage of small parts or screws.

3. The turning rack is welded with high -intensity steel structure, and the surface is treated with spraying process. The bottom of the flipper has a self -locking foot wheel, which can be moved to facilitate teaching.

two. Technical specification

Equipment shape: 100 × 600 × 1100mm (length × width × height)

Color: 7032

Steel pipe: 40*40*3mm

Universal foot wheel

The first two universal band lock function foot wheels

2 After the two thousand -facing foot wheels

The foot wheel and the table frame are fixed with the M6*4 screws, which is convenient for equipment m--ntenance and m--ntenance.

Foot wheel: 60mm × 50mm (diameter × width)

Foot wheel support: 1.0T

Soldiers: MOPA70; 1: 70