Jin top testing experimental device

Jin top testing experimental device,Electrical control engine anatomy experimental device

Function:

1. Institutional assembly tr--ning;

2. Measurement and tr--ning of institutional parts;

3. Drawing tr--ning tr--ning for institutions;

4. Drawing tr--ning for institutional parts;

Product parameters

1. Product material: aluminum alloy refined, use CNC machine tool refinement and produced through anode oxidation technology (do not accept rotation of rondrobin), each part must be installed in the aluminum alloy surveying box, and the buffer embedded material block;

2. In order to facilitate the safe surveying and mapping box size: about 365 × 265 × 120mm

3. Det--led configuration:

Bottom, top bowls, thread sleeves, adjust screws.

Occupational skills comprehensive integration tr--ning virtual simulation system:

The software in the software can be rotated, magnified, reduced, and translated at 360 °. There are general interactive buttons: return, homepage, help. All virtual simulation tasks are prompted, and the software automatically hooks after a task. There is an experimental task above the tool library

1. Basic three -dimensional (XYZ space coordinate icon is automatically rotated at the XYZ space coordinate icon.)

A. Graphic stereo: The experimental steps are divided into experimental tasks (text prompt tasks) -the construction model (the model in the drag and dragging tool library to the three -projection surface system, and automatically appear the projection, there is a prompt when choosing an error) - change the attitude (by passing the passage) Click on the up, down, left and right arrows) — Select the projection (enter the answer interface, select the 3D projection map completed at this time in 6 items)

B. Cutting three -dimensional: The experimental steps are divided into experimental tasks (text prompt tasks) -the construction model (the model in the drag and drag the tool library to the three -projection surface system, and automatically display projection) -The label projection situation (for the three -dimensional projection drawing calibration , Select the corresponding labeling symbols in 14 blank fences)

C. Concerning three -dimensional: Experimental steps are divided into experimental tasks (text prompt tasks) -Dhole digging (select arbitrarily digging models, at this time, you can select any noodles in the XYZ space coordinate, the model can be switched at the same time, and a coordinate slider appears appears. According to the size of the slider, the model appears with a corresponding degree of cutting surface) -the pore diameter change (select 1-4 aperture)-rear pores-select projection (enter the answering interface, select the three-dimensional projection map completed at this time in 8 items)

Jin top testing experimental device,Electrical control engine anatomy experimental device

Product introduction:

The device uses Toyota 8A-FE electronic control gasoline engine assembly for section. The components are complete and the sectional surface is reasonable. It can fully display the movement of the inner and outer structure and components of the gasoline engine. It is suitable for the principles of gasoline engine and the teaching of mechanical institutions.

Features:

1. Use the physical assembly of the original gasoline engine to cut the institution to cut the internal and external structures of the gasoline engine mechanism.

2. Spray the mechanical profile of the gasoline engine with different colors of p--nt.

3. The processing process of the three -phase gear deceleration sensor motor drives the crankshaft of the gasoline engine to operate at low speed, and truly demonstrates the movement of the internal mechanical parts of the gasoline engine.

4. The mobile table uses high -intensity steel structure welding, and the surface is sprayed on the surface. The bottom of the mobile platform has a self -locking foot wheel device, which can be moved for convenient teaching.

5. Machinery assembly and fitter assembly virtual simulation software: This software is developed based on Unity3D, which can choose 6 -level image quality. It has the design and virtual disassembly of the reducer and shaft structure, the design and simulation of common mechanical institutions, institutional resource libraries, institutional resource libraries. Typical mechanical institutions (virtual disassembly of gasoline engines), software is an overall software, which cannot be separate resources.

A. Turbine design and virtual disassembly interface can be selected from turbine sn--l pole cone gear reducer, second -level pilot gear reducer, conical cylindrical gear reducer, coaxial cylindrical gear reducer, cone gear reducer, first -class cylindrical, first -class cylindrical, Gear reducer.

The turbine sn--l tapered gear reducer: automatically play the assembly content after entering the software. Each step in the video has text description

Second -level unfolding cylindrical gear reducer: After entering the software, use the video to play content in the form of video. The video content should include: the name of the parts (scanning the QR code can see the part of the parts), the disassembly presentation (including disassembly, assembly), virtual disassembly Installation (including overall, low -speed shaft, mid -speed axis, high -speed shaft, box cover, box seat)

Cone cylindrical gear reducer, coaxial cylindrical gear reducer, conical gear reducer, first -class cylindrical gear reducer: After clicking, automatically jump to the Edrawings interface. The models are all three -dimensional models. It can rotate, zoom in, reduced, and translated at 360 °. At the same time, the entire reducer can be disassembled and assembled through the function of mobile parts. At the same time, you can select the homepage button to return to the initial state of the reducer ***. The cone gear reducer and first -class cylindrical gear reducer increase the plug -in horizontal surface function, which can freely drag the horizontal surface to observe the internal structure of the reducer.