The vehicle suspension structure system display and disassembly training platform

The vehicle suspension structure system display and disassembly tr--ning platform,Manga sand filtering method tr--ning table

1. Product introduction

The device is based on the car's front and rear suspension systems to fully display the composition and principles of the car's front and rear suspension.

It is suitable for the school's theoretical and m--ntenance needs of vehicle suspension.

2. Functional characteristics

1. The real car front and rear suspension system (distinguish between different parts in different parts) to fully display the composition of the car suspension system.

2. You can truly tr--ning and display tr--ning for the front and rear suspension systems of the car.

3. The bottom of the tr--ning table is welded with steel structure, the surface is treated with spraying process, and the self -locking wheel device is moved flexible, safe, reliable, and durable.

4. Machinery assembly and fitter assembly virtual simulation software: This software is developed based on Unity3D, which can choose 6 -level image quality. It has the design and virtual disassembly of the reducer and shaft structure, the design and simulation of common mechanical institutions, institutional resource libraries, institutional resource libraries. Typical mechanical institutions (virtual disassembly of gasoline engines), software is an overall software, which cannot be separate resources.

A. Turbine design and virtual disassembly interface can be selected from turbine sn--l pole cone gear reducer, second -level pilot gear reducer, conical cylindrical gear reducer, coaxial cylindrical gear reducer, cone gear reducer, first -class cylindrical, first -class cylindrical, Gear reducer.

The turbine sn--l tapered gear reducer: automatically play the assembly content after entering the software. Each step in the video has text description

Second -level unfolding cylindrical gear reducer: After entering the software, use the video to play content in the form of video. The video content should include: the name of the parts (scanning the QR code can see the part of the parts), the disassembly presentation (including disassembly, assembly), virtual disassembly Installation (including overall, low -speed shaft, mid -speed axis, high -speed shaft, box cover, box seat)

The vehicle suspension structure system display and disassembly tr--ning platform,Manga sand filtering method tr--ning table

1. Experimental purpose and principle:

Sometimes the natural water sources in surface water and groundwater sometimes cont--n a cert--n amount of iron and manganese. It not only affects some industrial growth, but also is not good for the people's lives. Therefore, in the "Life Drinking Water Regulations", the total amount of iron content does not exceed 0.3 mg/L. When exceeding the above provisions or special requirements for iron and manganese in cert--n industrial enterprises, measures should be taken to try to remove them.

There are the following methods:

1. Angle:

2. Limin alkaliization method;

3, concrete method;

4. Manga sand filtration method (this device uses manganese sand filtering method).

2. M--n technical indicators and parameters:

1. Input voltage: 220V

2. Working environment: 5 ℃ -40 ℃

3. Require raw water iron content: 3 ～ 5mg/L, manganese 1 ～ 2mg/L

4. Treatment of water: q = 0.1 ～ 0.3m3/h

5. Qi and water mixture: V = 0.05 ～ 0.06m/s

6. Manga sand particle size: D = 0.6 ～ 2.0mm (manganese sand volume: 0.082m3)

7, activated carbon particle size: ø2 ～ 4mm (quantity: 0.027m3)

8. Quartz sand particle size: ø0.6 ～ 2mm (quantity: 0.027m3)

9. Air volume: calculate according to 7 ～ 10m3/m3 water

10. Reverse routing expansion rate: about 30 %

11. Counterattack intensity: 20L/s ・ m2

12. Collwriting time: 5 ～ 10min

13. Total size: 1800 mm × 450 mm × 1800mm

14. Work power supply: AC220V ± 10%, 50Hz, single -phase three -line system, 1100W power, safety protection: ground protection, leakage protection, overcurrent protection