DY-213 Industrial Wastewater Treatment Process Simulation Training Platform

Release time：2024-06-23 02:30viewed：times

1. Experimental purpose:
In order to understand the commonly used unit operation technology in industrial wastewater, master the treatment process composed of these unit operations, and observe the behavior of wastewater, sludge and *r in the treatment process, the experimental device is specially developed for scientific research and teaching of water treatment . The whole set of equipment is automatically controlled by a programmable controller for its wastewater inflow, dosing coagulation, aeration, backwashing, discharge, and sludge discharge. The water treatment effect of each section is monitored. The whole set of equipment can be used in connection or separately, and each sewage pool has a developed sampling port.
II. M*n technical indicators and parameters:
1. Ambient temperature: 5℃～40℃
2. Processed water volume: 5～15L/h
3. Designed inlet and outlet water quality range:
Inlet BOD 400～800mg/L Outlet 40～80 mg/L
Inlet COD 600～1200mg/L Outlet 60～120 mg/
Inlet SS 100～300mg/L Outlet 10～50 mg/L
Inlet pH 6～9 Outlet 6～9
4. Working power supply: AC220V±10%, 50Hz, single-phase three-wire system, power 1500W, safety protection: with grounding protection, leakage protection, overcurrent protection
5. Overall dimensions of the device: length×width×height=5200mm×500mm×1700mm
III. M*n configuration:
1. 1 raw water tank: white PP board material, thickness 10mm, 600×400×500mm, with a dr*n valve installed on the bottom plate to dr*n the water;
2. 1 clean water tank: white PP board material, thickness 10mm, 400×400×500mm, with a dr*n valve installed on the bottom plate to dr*n the water;
3. 1 raw water tank stirring motor , 1 set of 304 st*nless steel stirring paddle; (power 25W, speed 120rpm), (including 1 speed regulator)
4. 1 set of micro-electrolyzer, transparent plexiglass material, wall thickness 10mm, 250×200×250mm, including 1 DC stabilized power supply,
5. Coagulation reaction tank, transparent plexiglass material, wall thickness 7mm, Ø 200×300mm;
6. Vertical flow sedimentation tank, transparent plexiglass material, wall thickness 8mm, Ø 250×350mm;
7. Aeration and construction of secondary sedimentation tank, transparent organic glass material, wall thickness 10mm, 450×350×600mm, with aeration device,
8. Siphon filter, transparent organic glass material, wall thickness 10mm, 450×350×600mm, including 1 suction vacuum pump,
9. Activated carbon adsorption tank, transparent organic glass material, wall thickness 10mm, 350×300×450mm, with backwashing device
10. 1 series stirring motor, 1 set of 304 st*nless steel stirring paddle; (power 90W, speed 3000rpm),
11. 1 stirring motor, 1 set of 304 st*nless steel stirring paddle; (power 6W, speed 80rpm),
12. 2 anti-corrosion lifting magnetic water pumps, flow rate: 16~19 (L/min), head: 2.7~3.4 (m) power 20W;
13. 1 anti-corrosion sludge return water pump, flow rate: 16-19 (L/min), head: 2.7-3.4 (m), power 20W;
14. Flow measurement and regulation: 2 rotor flow meters (LZS-15, range 6-60L/h)
15. Flow measurement and regulation: 1 gas flow meter (LZB-10, range 250-2500L/h)
16. 1 *r pump, power: 20 W, maximum gas volume: 6L/min, with 1 set of microporous aeration tubes,
17. 1 set of programmable automatic controller,
18. 1 dosing metering peristaltic pump, flow range: 0.008-460mL/min, equipped with 1 organic glass dosing box,
19. 1 intermediate water tank: white PP board material, thickness 10mm, 400×400×500mm, with a vent valve installed on the bottom plate,
20. Experimental table (white 10mm thick PP board),
21. Power supply control system: 1 double-sided matte dense pattern spray-coated electric control box, leakage protector (Delixi brand), voltmeter, lockable button switch, wire tube, etc.,
22. Matching UPVC connecting pipes and valves (Zhongc* brand).
23. St*nless steel frame experimental table (30mm×30mm st*nless steel square tube, equipped with casters for universal wheels with locking feet), etc.
24. Virtual simulation software for electrical installation of building and intelligent building Based on unity3d design, users can choose different sizes of interactive interfaces according to computer configuration, and can choose six levels of image quality. The model in the software can be rotated 360°, enlarged, reduced, and translated. There are assistant prompts during the use of the software, as follows: A. Wet alarm system 1. System overview: Overview of wet alarm system 2. Equipment recognition: It has the best viewing angle, equipment det*ls (displaying the introduction or parameters of the equipment), exercises (built-in 6 multiple-choice questions, with prompts for correct and wrong choices), schematic diagram (you can enter the equipment from the schematic diagram). The equipment includes: sprinkler, water flow indicator, signal butterfly valve, exhaust valve, fire alarm control, high pressure gauge, high-level water tank, weiya control cabinet, pressure regulating tank, flow switch, terminal water testing device, dr*nage facilities, water pump connector, hydraulic alarm, delay device, wet alarm, butterfly valve, check valve, fire pump, safety pressure regulating valve, fire water tank.
3. Principle display: Display the working principle of the wet alarm system, 3D animation demonstration, 3D model is semi-transparent, and the internal water flow can be seen. Equipped with exercise module (4 multiple-choice questions are built-in, and there are prompts for correct and wrong choices)
4. Design layout: There are multiple-choice questions and calculation questions, each of which is scored, and the correct answer and score are displayed after submission
B. Gas fire extinguishing system
1. System overview: Overview of gas fire extinguishing system
2. Equipment recognition: There are optimal viewing angles, equipment det*ls (displaying the introduction or parameters of the equipment), exercises (8 built-in multiple-choice questions, and there are prompts for correct and wrong choices), and schematic diagrams (you can enter the equipment from the schematic diagram). The equipment includes: nozzles, HFC-227 storage bottles, bottle head valves, heptafluoropropane check valves, high-pressure hoses, gas check valves, safety valves, weighing alarms, electromagnetic starters, selection valves, smoke alarms, and fire alarm controllers.
3. Principle display: Display the working principle of the gas fire extinguishing system, 3D animation demonstrations, and 3D models are semi-transparent, and the internal gas can be seen. Equipped with practice module (built-in 3 multiple-choice questions, with prompts for correct and wrong choices)
4. Design and layout: There are 6 multiple-choice questions, each with a score, and the correct answer and score will be displayed after submission
C. Escape drill: Teaching in the form of fun games, escaping from the burning room within a limited time, and wrong choices will directly enter the score interface.
Similar products:

ZR-213B Industrial wastewater treatment process simulation experimental device	Mn parameters and configuration: water treatment capacity: 5-15L/h, device dimensions: 5500mm×500mm×1600mm, power supply 220V Power 1200W, configuration: the device body is made of transparent organic glass, including 1 set of micro-electrolyzer, 1 set of coagulation reaction tank, 1 set of vertical flow sedimentation tank, 1 set of aeration combined secondary sedimentation tank, 1 set of siphon filter, 1 set of activated carbon adsorption tank, etc., equipped with 1 wastewater tank, 3 water tanks, 2 sets of stnless steel agitators, 1 series motor, 2 sets of aeration devices, 1 set of stnless steel electrolyzer, 1 reflux constant current pump, 2 water pumps, 2 rotor flowmeters, 1 gas flowmeter, 1 r pump, 2 solenoid valves, 1 suction vacuum pump, 1 set of programmable time controller, 1 DC regulated power supply, 1 forward and reverse switch, 1 set of activated carbon filler, 1 set of siphon filter filler, 1 Lenovo computer, 19-inch LCD monitor, 1 computer control circuit board, 1 computer connection line, 1 computer communication interface, 1 set of software, 1 electric control box, leakage protection switch, button switch, connecting pipes and ball valves, st*nless steel stand with movable wheels, etc.
ZR-214 type Residential sewage treatment and recl*med water reuse equipment	Mn parameters and configuration: water treatment capacity: 10-20L/h, device dimensions: 2600mm×550mm×1600mm, power supply 220V, power 900W, configuration: the experimental device consists of a regulating tank, an aerated grit chamber, an acidification tank, a contact oxidation tank, a vertical flow secondary sedimentation tank, a sludge concentration tank, etc. The supporting equipment includes 2 water distribution tanks, 1 water inlet pump, 1 gas flow meter, 1 rotor flow meter, 1 fan, 1 speed regulating motor, 1 set of agitators, 1 set of peak nest tubes, 1 electric control box, leakage protection switch, push button switch, connecting pipes and ball valves, stnless steel stand with moving wheels, etc.
ZR-215 Urban domestic wastewater treatment experimental device (automatic control)	Mn parameters and configuration: water treatment volume: 100-150L/h, device dimensions: 110000mm×800mm×1800mm, power supply 220V, power 3000W, configuration: 1 set of inclined plate oil separator treatment, 1 set of anaerobic tank treatment, 1 set of anoxic tank treatment, 1 set of aerobic tank treatment, 1 set of radial flow sedimentation tank treatment, 1 set of pyramid sludge thickening tank treatment, 1 set of 304 stnless steel sludge digestion tank treatment, 1 set of 304 stnless steel plate and frame filter press treatment, 1 polyethylene dosing water tank, 2 polyethylene regulating water tanks, 2 stirring devices, 2 electromagnetic r compressors, 8 flow meters, 1 dosing metering pump (digital display), 10 anti-corrosion water pumps, 1 set of heating constant temperature water bath, 1 digital temperature controller, 1 set of temperature control system, 1 batch of various fillers, 1 set of automatic controller, 1 electric control box, leakage protection switch, push button switch, connecting pipes and ball valves, st*nless steel stand with movable wheels, etc.
ZR-215B Urban domestic wastewater treatment experimental device (computer controlled)	Mn parameters and configuration: water treatment capacity: 100-150L/h, device dimensions: 110000mm×800mm×1800mm, power supply 220V Power 3000W configuration: 1 set of inclined plate oil separator treatment, 1 set of anaerobic tank treatment, 1 set of anoxic tank treatment, 1 set of aerobic tank treatment, 1 set of radial flow sedimentation tank treatment, 1 set of pyramid sludge thickening tank treatment, 1 set of 304 stnless steel sludge digestion tank treatment, 1 set of 304 stnless steel plate and frame filter press treatment, 1 polyethylene dosing water tank, 2 polyethylene regulating water tanks, 2 sets of stirring devices, 2 electromagnetic r compressors, 8 flow meters, 1 dosing metering pump (digital display), 10 anti-corrosion water pumps, 1 set of heating constant temperature water bath, 1 digital temperature controller, 1 set of temperature control system, 1 batch of various fillers, 1 Lenovo computer, 1 19-inch LCD monitor, 1 computer control circuit board, 1 computer connection line, 1 computer communication interface, 1 set of software, 1 electric control box, leakage protection switch, push button switch, connecting pipes and ball valves, st*nless steel stand with movable wheels, etc.

Previous：DY-212 Pharmaceutical Wastewater Treatment Basic Process Training Platform

Next：DY-216 Wastewater Aerobic Biodegradability Training Platform