dyHGLT-11 variable bottom slope movable water tank demonstration training platform
Release time：2024-06-09 19:00viewed：times
Technical parameters:
1. Operating environment: temperature 0-40℃, relative humidity: ≤90%RH, power supply: 220V/50Hz, continuous operation possible.
2. Adopt low-noise, rust-free and environmentally friendly small water pump, maximum lift: 35m, maximum flow: 3.5m3/h, power: 550W.
3. Flow: The maximum flow of water supply Qmax=300 ml/s, the flow of experimental pipeline Qp=0~200 ml/s.
4. Standard water level probe 0-300mm, tube flow meter 0-10m3/h.
5. Experimental water tank size: 2000×80×250mm. The entire tank is made of organic glass. The curve of the water surface is clearly visible, and it is equipped with a ruler and a level to show the slope.
6. There is a movable shaft device in the middle, which can be used to manually adjust different slopes with a lift as needed, making it flexible and convenient to use.
7. The movable model has a hydraulic jump device, and the movable gate can be adjusted to demonstrate twelve different water surface streamlines at different slopes.
8. Water tank: 500×300×600mm, PVC material.
9. The fluid-water used in the experiment is designed for full circulation, fully saving water resources.
10. The frame and tabletop are made of 304 st*nless steel, with compact structure, beautiful appearance and easy operation.
11. Overall dimensions: 2200×350×1600mm (length×width×height)
12. The virtual simulation software for electrical installation of building buildings and smart buildings is based on unity3d design. Users can choose different interactive interface sizes according to computer configuration, and six levels of p*nting are optional. quality level. The model in the software can be rotated 360°, enlarged, reduced, and translated. There are assistant prompts during the use of the software, and the content is as follows: A. Wet alarm system 1. System overview: Overview of wet alarm system 2. Equipment awareness: equipped with the best viewing angle, equipment det*ls (displaying the introduction or parameters of the equipment), and exercises (Built-in 6 multiple-choice questions, prompts for correct and incorrect choices), schematic diagram (can be entered into the device from the schematic diagram). Equipment includes: nozzle, water flow indicator, signal butterfly valve, exhaust valve, fire alarm control, high pipe pressure gauge, high water tank, Wia control cabinet, pressure stabilizing tank, flow switch, terminal water testing device, dr*nage facilities, water pump connection alarms, hydraulic alarms, delayers, wet alarms, butterfly valves, check valves, fire pumps, safety pressure regulators, and fire pools. 3. Principle display: Show the working principle of the wet alarm system, three-dimensional animation demonstration, the three-dimensional model is translucent, and the internal water flow can be seen. Equipped with a practice module (built-in 4 multiple-choice questions, with prompts for correct and incorrect choices) 4. Design layout: There are multiple-choice questions and calculation questions, each question is scored, and the correct answer and score will be displayed after submission B. Gas fire extinguishing system 1. System overview: Overview of gas fire extinguishing system 2. Equipment awareness: equipped with the best viewing angle, equipment det*ls (displaying the introduction or parameters of the equipment), exercises (built-in 8 multiple-choice questions, with prompts for correct and incorrect choices), Schematic diagram (access to the device from the schematic diagram). Equipment includes: nozzle, HFC-227 storage bottle, bottle head valve, heptafluoropropane one-way valve, high-pressure hose, gas one-way valve, safety valve, weighing alarm, electromagnetic starter, selection valve, smoke alarm, fire Alarm controller. 3. Principle display: Show the working principle of the gas fire extinguishing system, three-dimensional animation demonstration, the three-dimensional model is translucent, and the internal gas can be seen. Equipped with a practice module (built-in 3 multiple-choice questions, with prompts for both correct and incorrect choices) 4. Design and layout: There are 6 multiple-choice questions, each question is scored, and the correct answer and score will be displayed after submission. C. Escape drill: adopted Teaching is conducted in the form of a fun game. Escape from the burning room within a limited time. If you make a wrong choice, you will directly enter the score interface . Experimental purpose: 1. Demonstrate various hydraulic phenomena such as hydraulic jumps and water surface curves in non-uniform flows in open channels. 2. Some quantitative measurement experiments can be carried out. M*n configuration: water tank, grid plate, wide-top weir, practical section weir, water storage tank, water pump, circulation pipeline, valve, flow meter, water level probe, slope lift, st*nless steel bracket.
Wechat scan code follow us
